[MOD] |init.d| 918-1242Mhz CPU & 128-200Mhz GPU addons

[qbert456]

I don't understand the first page, is the normal one with this mod better for battery or worse than unmodified?

 

[tzifos]

Thank you !!

 

[drewph]

Great work..
is this compatible to mi2s?
I would like to control the cpu frequency by setting the normal mode
max frequency to 1.2gh instead of 1.7gh to save battery

 

[Acid]

It should be. MI2S has much more custom frequencies than old MI2 but it also has the same freqs up to 1512Mhz.

 

[vidar]

What about these configurations?
Power save min 300 max 900
Normal min 300 max 1200
Performance min 300 max 1500?

Inviato dal mio MI 2 con Tapatalk 2

Would also love to have this as settings!

Sent with my Xiaomi MI2 with Tapatalk 4

 

[DNL666]

Hey Guys,
I'm trying to run this mod on stock miui, I flashed redmaner kernel, init.d is working (have log in data/), but from no reason I can't run this script :/ Any ideas why? (after flashing script is in ect/ini.d folder so it should work :/)

 

[Wajk]

check CPU Speed with CPU Spy after install
and check script inside init.d folder

What about these configurations?
Power save min 300 max 900
Normal min 300 max 1200
Performance min 300 max 1500?

Sounds good, but I didn't find power state settings, yet.
This is kernel or framework settings.

Wajk but you can make a mod with such characteristics?
Power Saving mode 918Mhz mod
Normal mode with 918Mhz mod
Performance mode 1242Mhz mod

Just flash my MOD, boot into ROM and select your Power Mode, and after restart your device.
Example after restart you will get Performance settings with locked to 1242Mhz

 

[DNL666]

Ok, finally found the problem. So - using stock miui, using wajk script for 1200 Mhz, applying it with script manager. Everything work fine till I lock my device, after unlocking, my maximal frequencies are back to 1700 Mhz :/ (according to CPU SPY). Was testing same situation on CM 10.2 from m1cha and it was working fine... Any ideas why?

 

[sebsch1991]

Ok, finally found the problem. So - using stock miui, using wajk script for 1200 Mhz, applying it with script manager. Everything work fine till I lock my device, after unlocking, my maximal frequencies are back to 1700 Mhz :/ (according to CPU SPY). Was testing same situation on CM 10.2 from m1cha and it was working fine... Any ideas why?

Same problem here on stock miui...

I can set the frequencies, but system will overwrite it on specific actions.. (for example locking,unlocking,changing power mode)
I set to 1350000, unlock device, value is back on 1720000 again...

I wrote small script to watch cpu states

#!/system/bin/sh
echo CPU    ONLINE    MAX    MIN  CUR
for i in 0 1 2 3
do
    max=`cat /sys/devices/system/cpu/cpu$i/cpufreq/scaling_max_freq 2> /dev/null`
    min=`cat /sys/devices/system/cpu/cpu$i/cpufreq/scaling_min_freq 2> /dev/null`
    curr=`cat /sys/devices/system/cpu/cpu$i/cpufreq/scaling_cur_freq 2> /dev/null`
    online=`cat /sys/devices/system/cpu/cpu$i/online 2> /dev/null`
   
    echo CPU$i    $online    $max    $min    $curr
done

You can execute from shell (ADB, SSH, Connectbot,...)

Why is it working with wiui but not with stock ROM ? Im gonna check wiui init scripts for further dependencies..

 

[Ermendorer]

I flash the system with 1242Mhz_CPUmod_4Mi2.zip but the maximum frequency is always 1500Mhz, i don't understand what.

 

[Ermendorer]

Finally it's okay

Envoyé de mon MI 2 en utilisant Tapatalk

 

[MatteoTheBoss]

Hi, link for 1242 MOD doesn't work.

 

[regent89]

Here is a temporary mirror
https://dl.dropboxusercontent.com/u/57398528/1242Mhz_CPUmod_4Mi2.zip

Wajk said in other thread that he's kind of busy these days.

btw this mod is the ultimate tool for balancing battery life with lagless performance. (mi2s with power saving profile)

 

[zbot]

Hi when I use the mod I can then delete the performance control app?

Gesendet von meinem MI 2S mit Tapatalk

 

[Wajk]

Hi when I use the mod I can then delete the performance control app?

You can control your SoC with this script. So you don't need any 3rd party app for that.

@all: added GPU addons to first post

 

[regent89]

Thank you Wajk. I will try GPU Mod asap.

Please inform me (not found in qualcomm site) what is stock clock of Adreno 320?

 

[Wajk]

Thank you Wajk. I will try GPU Mod asap.
Please inform me (not found in qualcomm site) what is stock clock of Adreno 320?

stock clock settings is 400Mhz

 

[regent89]

Great. Just flashed.

Until now my settings were:
CPU freq: 384mhz - 1242mhz
Governor: on demand
I/O: cfq

My battery stats at normal mode are
Uptime: 24-28 hours
Screen on Time: 4h
1 hour calls (2G Mode only)
1 hour gaming
Wifi on 24/7

I will post my stats with GPU MOD in the next days

 

[deini]

@Wajk do you know what are the voltages for each frequency? Because sometimes the voltages are the same for different frequencies, so it would be better to use the highest frequency in this case

Sent from my MI 2S using Tapatalk now Free

 

[Lightkeeper]

Friends, does anyone know an application showing GPU frequency realtime?

Sent from my MI 2 using Tapatalk 4

 

[xeGox]

Friends, does anyone know an application showing GPU frequency realtime?

Sent from my MI 2 using Tapatalk 4

Trickster mod

Inviato dal mio Xiaomi Mi-5f (f sta per fun,non per fan)...con tapatalk 26°

 

[Lightkeeper]

Trickster mod

Thanks, very helpful.

Sent from my MI 2 using Tapatalk 4

 

[deini]

Just one more question xD I read some time ago that using "performance" governor was always better than setting max and min frequency the same; because that way the kernel won't be somehow tryng to look for the ideal frequency.
So I wonder if it won't be better to ser governor to performance when we use 128mHz mod.
I hope I have explained well enough, I don't have much knowledge about this