Known Issues (Weekly ROM)


Status
Not open for further replies.
VoLTE not work its says carrier dont support and gray out cant enable it
i tried clear phone and sim toolkit app same issue
and i called my carrier to re activate VOLTE same issue
 
  • Like
Reactions: kephasa
Hiding app notifications is not working. Problem with Android 11. Stable android 10 version works correctly as well.

Phone Mi 10 Lite Zoom
 
  • Like
Reactions: TED68
I'm using mi10 ultra 512gb version. Originally Chinese rom but flashed to 20.12.10 miui beta. When in full screen I can pull down notifications section I can not pull it back up. But control center I can not pull back up. I have to swipe from the wife (back function) to pull it back. This only happens in horizontal orientation
 
@Igor Eisberg
@ingbrzy

For Apollo device (HMK3SUltra_MI10T) we have incorrect vbmeta, so after flashing ROM there is a bootloop in TWRP.
We are forced to flash vbmeta through the PC (in fastboot mode) to boot into the system.
This is several weekly releases already.

Here is the correct vbmeta in the archive.
 

Attachments

  • vbmeta_k30s_appollo_pro.zip.pdf
    3.5 KB · Views: 238
Last edited:
@Igor Eisberg
@ingbrzy

For Apollo device (HMK3SUltra_MI10T) we have incorrect vbmeta, so after flashing ROM there is a bootloop in TWRP.
We are forced to flash vbmeta through the PC (in fastboot mode) to boot into the system.
This is several weekly releases already.

Here is the correct vbmeta in the archive.
seems you are only one reporting bootloop issue on apollo.. please install our ROM according our installation guide.. Updater - select zip - reboot
 
seems you are only one reporting bootloop issue on apollo.. please install our ROM according our installation guide.. Updater - select zip - reboot

1. Downloading the ROM.
2. Manually reboot into TWRP
3. Installing firmware from TWRP.

4. Loading into the system -> bootloop for Apollo.

I have been doing 1-3 steps for several years now (I install all weekly ROMs ones as a translator for checking).
But only with firmware for Apollo there is a problem.

This problem is not only for me, but for many on 4pda (russian community).
 
Then it may be your TWRP issue.. Patched vbmeta is already part of our ROM.. Seems your TWRP is not able to flash vbmeta.img during ROM installation..
 
  • Like
Reactions: nik.shersh
Then it may be your TWRP issue.. Patched vbmeta is already part of our ROM.. Seems your TWRP is not able to flash vbmeta.img during ROM installation..
Thanks for the tip.
What recovery do you recommend and where can I get it separately?
 
@ingbrzy

I tried 2 TWRPs:

First recovery: TWRP_apollo_3.4.0_10_whyle.img
Second recovery: recovery-TWRP-3.4.2B-1206-REDMI_K30S_ULTRA-CN-wzsx150.img

Both give a bootloop.

In the stock ROM vbmeta size 8 kb and 4 kb.
vbmeta in the archive.

When in the xiaomi.eu ROM I replace the vbmeta with the stock one,
after flashing the ROMs in both TWRPs, loading into the system goes without problems.

What TWRP should be used to flash xiaomi.eu ROM without any problems?
 
Last edited:
My K30, camera app crashes after taking 1 picture in auto mode.. And also Macro and UW camera modes are just main camera, except if i go to Pro mode I can use the other cameras on build 20.12.10

Sent from my Redmi K30 using Tapatalk
 
Bubbles feature working improperly on the Poco F2 Pro.
c0f7f246232c04b1e0d9acf49252d0fb.jpg


Sent from my POCO F2 Pro using Tapatalk
 
  • Like
Reactions: Akaigetsu
Unable to reproduce on Mi 10 Weekly 20.12.10. Chat bubbles work here alright.
Can you tell us (those with the bubble issue) what your settings are?
• Light/Dark theme?
• Default launcher?
I tried both default launcher and light theme (my usual is Nova Launcher + Dark theme) and this didn't solve it for me but maybe there're some settings we can toggle to prevent this issue.
 
VoLTE not work its says carrier dont support and gray out cant enable it
i tried clear phone and sim toolkit app same issue
and i called my carrier to re activate VOLTE same issue


You may try these to turn on your VOLTE function manually..

1. To check IMS status: open your phone app and dial *#*#4636#*#*
2. To unlock VoLTE: open your phone app and dial *#*#86583#*#*
3. To unlock VoWifi: open your phone app and dial *#*#869434#*#*
 

Attachments

  • 03.JPG
    03.JPG
    36.3 KB · Views: 237
  • 04.JPG
    04.JPG
    33.5 KB · Views: 245
You may try these to turn on your VOLTE function manually..

1. To check IMS status: open your phone app and dial *#*#4636#*#*
2. To unlock VoLTE: open your phone app and dial *#*#86583#*#*
3. To unlock VoWifi: open your phone app and dial *#*#869434#*#*

Thanks i already try this same issue even my friends with this update they had the issue
 
@Igor Eisberg
Battery drain on 20.12.9 (Appollo)
-20% per night

Code:
================
Kernel Wakelocks
================
usb (*api*): 9 h 7 m 57 s  Cnt:(c/wc/ec)0/0/0 100,0%
c440000.qcom,spmi:qcom,pm8150b@2:qpnp,fg (*api*): 2 h 31 m 52 s  Cnt:(c/wc/ec)27891337/0/0 27,7%
qcom-step-chg (*api*): 42 m 15 s  Cnt:(c/wc/ec)2825773/0/0 7,7%
998000.qcom,qup_uart (*api*): 33 m  Cnt:(c/wc/ec)4018/0/0 6,0%
hal_bluetooth_lock (*api*): 32 m 54 s  Cnt:(c/wc/ec)2182/0/0 6,0%
PowerManagerService.WakeLocks (*api*): 17 m 36 s  Cnt:(c/wc/ec)1355/0/0 3,2%
...
 
@Igor Eisberg
Battery drain on 20.12.9 (Appollo)
-20% per night

Code:
================
Kernel Wakelocks
================
usb (*api*): 9 h 7 m 57 s  Cnt:(c/wc/ec)0/0/0 100,0%
c440000.qcom,spmi:qcom,pm8150b@2:qpnp,fg (*api*): 2 h 31 m 52 s  Cnt:(c/wc/ec)27891337/0/0 27,7%
qcom-step-chg (*api*): 42 m 15 s  Cnt:(c/wc/ec)2825773/0/0 7,7%
998000.qcom,qup_uart (*api*): 33 m  Cnt:(c/wc/ec)4018/0/0 6,0%
hal_bluetooth_lock (*api*): 32 m 54 s  Cnt:(c/wc/ec)2182/0/0 6,0%
PowerManagerService.WakeLocks (*api*): 17 m 36 s  Cnt:(c/wc/ec)1355/0/0 3,2%
...
Not sure how this is useful, battery drain could be anything.
 
Since Last update, 20/12/10,i cant use volte.
Already enable and disable menu tru e *#*#86583#*#*, and cant enable it. Also says that volte it is not supported by my operator.
Already call to my operator, and volte its funcional.
By the code, Only can enable/disable sim 2,but i have no sim on it
 

Attachments

  • Screenshot_2020-12-21-19-28-47-514_com.android.phone.jpg
    Screenshot_2020-12-21-19-28-47-514_com.android.phone.jpg
    208.3 KB · Views: 217
Not sure how this is useful, battery drain could be anything.
@Igor Eisberg
After replacing the kernel from 20.12.9 with one from 20.12.2, the battery drain has left and the device sleeps normally.
So this it China's issue.

Code:
Level lost [%]: Bat.: -7%(81% to 74%) [0,8%/h]
Voltage lost [mV]: (4170-4096) [8,7%/h]
Deep Sleep (): 7 h 3 m 46 s  83,2%
...
alarmtimer (*api*): 29 m 27 s Cnt:(c/wc/ec)877/0/0 5,8%
998000.qcom,qup_uart (*api*): 24 m 13 s Cnt:(c/wc/ec)3778/0/0 4,8%
hal_bluetooth_lock (*api*): 23 m 36 s Cnt:(c/wc/ec)1979/0/0 4,6%
PowerManagerService.WakeLocks (*api*): 14 m 54 s Cnt:(c/wc/ec)1570/0/0 2,9%
 
@Igor Eisberg
After replacing the kernel from 20.12.9 with one from 20.12.2, the battery drain has left and the device sleeps normally.
So this it China's issue.

Code:
Level lost [%]: Bat.: -7%(81% to 74%) [0,8%/h]
Voltage lost [mV]: (4170-4096) [8,7%/h]
Deep Sleep (): 7 h 3 m 46 s  83,2%
...
alarmtimer (*api*): 29 m 27 s Cnt:(c/wc/ec)877/0/0 5,8%
998000.qcom,qup_uart (*api*): 24 m 13 s Cnt:(c/wc/ec)3778/0/0 4,8%
hal_bluetooth_lock (*api*): 23 m 36 s Cnt:(c/wc/ec)1979/0/0 4,6%
PowerManagerService.WakeLocks (*api*): 14 m 54 s Cnt:(c/wc/ec)1570/0/0 2,9%
Good to know, hardly surprises me. The issues introduced by China ROM we have to fix ourselves are countless.
 
Status
Not open for further replies.