Fastboot Rom (miui 8/9, Los13, AOSP) With Gapps, Root And Some Other Stuffs

[slowsmoke]

I tried to flash two different roms (xiaomi.eu 7.3.30 and China stable 8.2.1) but they have both the same problem: if I leave the Mi Pad 2 in standby for a while, it turns off and to turn it on, i have to press for 10 seconds the on-off button
Can you help me? thank you so much

 

[Papka__]

I tried to flash two different roms (xiaomi.eu 7.3.30 and China stable 8.2.1) but they have both the same problem: if I leave the Mi Pad 2 in standby for a while, it turns off and to turn it on, i have to press for 10 seconds the on-off button
Can you help me? thank you so much

You can try to re-flash full stock ROM for the first. I mean - download latest original China fastboot ROM, extract from archive all images + recovery from there, then flash them all. I would also recommend full wipe. Then check if you still getting same problem. If yes, then it's your device faulty not sure anyone will help you. If problem will disappear - flash over anything you prefer.

 

[slowsmoke]

You can try to re-flash full stock ROM for the first. I mean - download latest original China fastboot ROM, extract from archive all images + recovery from there, then flash them all. I would also recommend full wipe. Then check if you still getting same problem. If yes, then it's your device faulty not sure anyone will help you. If problem will disappear - flash over anything you prefer.

Thank you for the reply, where i found the stock rom?
If the problem don't desappear i have to flash fake vendor rom and send it to GearBest

 

[Papka__]

Take fastboot ROM from here http://en.miui.com/thread-551246-1-1.html

 

[slowsmoke]

@Papka__
I have to wait for xiaomi's SMS or can i unlock the bootloader in a faster way?

 

[Papka__]

@Papka__
I have to wait for xiaomi's SMS or can i unlock the bootloader in a faster way?

No point to wait. Unlock working only the way, used in universal tool... Just unlock if you need. Just a question - for what?

 

[slowsmoke]

No point to wait. Unlock working only the way, used in universal tool... Just unlock if you need. Just a question - for what?

I'm following the guide you posted, and Miflash don't recognize my MiPad, maybe because the bootloader is locked? Damn
Sorry for my bad english

 

[Papka__]

Forget about this crap. Use this https://xiaomi.eu/community/threads/universal-tool-for-managing-mipad-2.36891/

 

[Papka__]

Of course drivers should be installed

 

[slowsmoke]

Of course drivers should be installed

i think, if worked with your tool...

 

[slowsmoke]

Forget about this crap. Use this https://xiaomi.eu/community/threads/universal-tool-for-managing-mipad-2.36891/

i can flash other roms with this tool? Great

 

[Papka__]

i can flash other roms with this tool? Great

Only fastboot ROM's can be flashed.

 

[slowsmoke]

Only fastboot ROM's can be flashed.

I Flashed MIUI 8 China Developer 7.3.23 with your tool and reset the device.
The problem persists. What can I do?
I'm frustrated because I'm not new in modding but this device is drivin' me crazy

 

[Papka__]

I Flashed MIUI 8 China Developer 7.3.23 with your tool and reset the device.
The problem persists. What can I do?
I'm frustrated because I'm not new in modding but this device is drivin' me crazy

I told you - you should flash original fastboot ROM images. All of them. You could do this with the Tool, but ROM should be full.

 

[slowsmoke]

I told you - you should flash original fastboot ROM images. All of them. You could do this with the Tool, but ROM should be full.

I just copied "boat loader, System, and boot" images in ROM folder, am i doing wrong?

 

[calin5791]

Hi Papka, does your rom integrate Mi Account verification? I'm about to buy a mi pad 2 which is locked in miui8 at mi account verification screen, actual owner doesn't know the password, so it's useless.

 

[Papka__]

Hi Papka, does your rom integrate Mi Account verification? I'm about to buy a mi pad 2 which is locked in miui8 at mi account verification screen, actual owner doesn't know the password, so it's useless.

Verification is built in MIUI. Only thing you can do - contact Xiaomi support. Maybe they will be able to help you.

 

[gearosv2]

I just copied "boat loader, System, and boot" images in ROM folder, am i doing wrong?

Hi, I think you are doing correctly. Did the ROM folders contain the IMG files? If yes, then you copied to the right directory. What OS are you using and did you see your Mi Pad 2 appearing as a storage device in your Windows Explorer. Your Mi Pad 2 needs to be recognized before you use the universal tool to flash the latest ROM you downloaded from Pakka__

 

[Papka__]

China based ROM 7.4.27 published

 

[gearosv2]

Has anyone tried the latest OTA update for China Dev ROM? Thanks in advance.

 

[Steven Braithwaite]

Has anyone tried the latest OTA update for China Dev ROM? Thanks in advance.

Yes, I'm running 7.5.11 via OTA update and all is well

 

[Papka__]

China and Xiaomi.eu based ROM's 7.5.25 published

 

[saint33]

Hi, is OTA supported only in China dev or also China stable ROM?
edit: I installed stable and OTA works fine also. Thanks, ROM looks great!

 

[Papka__]

Hi, is OTA supported only in China dev or also China stable ROM?
edit: I installed stable and OTA works fine also. Thanks, ROM looks great!

I suppose you will loose all addons applying OTA to Stable ROM, because I think it' s simply full ROM. I'm going to publish new China stable 8.5.1.0 this week.

 

[Papka__]

China based ROM 7.6.8 published. Recommend to re-flash whenever you got it as OTA. Some changes done. Of course you don't need to reset device. Dirty flash is ok.