Twrp Recovery


Sithlord512589 said:
Okay, hopefully I find someone wiser than me....
I have a Mi 14 Pro CN Version - Bootloader unlocked with NCUnlock (for $85 :rolleyes:)
- I did a factory reset and a clean data.
- Then I flashed the TWRP-3.7.1_12-v8.6_A14-shennong in fastboot mode (both Partitions A/B)
- Then I transferred the newest dev Rom HyperOS 1.0 24.3.18
- And installed it via TWRP
- Next I wanted to root my device
- so I copied over the ROM file to my Mi 14 Pro,
- extracted the boot image and patched it with the latest Magisk canary version
- then copied the patched file back to PC
- Into fastboot and then copied patched boot image onto both Partitions A/B
- Then reboot into system and start Magisk to complete the installation...
- But when I open it, then it doesn't show root on the system, just the installed app.

- So I tried to install the magisk,zip via TWRP and tadaaaaa "ass ****ed" because TRWP doesn't decrypt my partitions..

So I don't have root right now,
because the fastboot method somehow fails
and the TRWP method won't work until the mighty devs have solved the decryption issue :confused:

So I have two questions...
First, are my partitions encrypted in every scenario (like without Password or Display Lock), because then would TWRP become pretty useless until updated.

And my second question: Has anyone any idea what I may have missed getting Magisk working?

Any help on this issue would be highly appreciated.
The only thing I could try is to wipe my device (I already copied 100 GB of personal data and App backups :rolleyes:)
And install the ROM via fastboot this time and doing the magisk install also via fastboot while I don't install TWRP Recovery?

I hope I could express my problem and myself properly
Click to expand...
Привет! :)

Чтобы установить Magisk надо сделать:
1. Прошить прошивку через Fastboot.
2. Из этой! прошивки вытащить init_boot.img
3. Установить на смартфон Magisk.apk
4. Сразу его скрыть, потом сложнее :)
5. Скопировать init_boot.img на смартфон.
6. Установить Magisk через патч boot.
7. Скопировать пропатченный файл init_boot.img на ПК.
8. Перейти в Fastboot.
9. Прошить init_boot.img командой: fastboot flash init_boot init_boot.img
...
PROFIT!

Повторять с каждым обновлением. Брать файл из новой прошивки!

For English :)

Hi! :)

To install Magisk you need to do:

1. Flash the firmware via Fastboot.
2. From this one! pull out the firmware init_boot.img
3. Install Magisk.apk on your smartphone
4. Hide it right away, then it’s more difficult :)
5. Copy init_boot.img to your smartphone.
6. Install Magisk via boot patch.
7. Copy the patched init_boot.img file to your PC.
8. Go to Fastboot.
9. Flash init_boot.img with the command: fastboot flash init_boot init_boo t.img
...
PROFIT!

Repeat with every update. Take the file from the new firmware!
 

Attachments

  • Screenshot_2024-07-05-05-05-19-670_azstczru.i.jpg
    Screenshot_2024-07-05-05-05-19-670_azstczru.i.jpg
    429.5 KB · Views: 78
  • Like
Reactions: Sithlord512589
Sithlord512589 said:
Okay, hopefully I find someone wiser than me....
I have a Mi 14 Pro CN Version - Bootloader unlocked with NCUnlock (for $85 :rolleyes:)
- I did a factory reset and a clean data.
- Then I flashed the TWRP-3.7.1_12-v8.6_A14-shennong in fastboot mode (both Partitions A/B)
- Then I transferred the newest dev Rom HyperOS 1.0 24.3.18
- And installed it via TWRP
- Next I wanted to root my device
- so I copied over the ROM file to my Mi 14 Pro,
- extracted the boot image and patched it with the latest Magisk canary version
- then copied the patched file back to PC
- Into fastboot and then copied patched boot image onto both Partitions A/B
- Then reboot into system and start Magisk to complete the installation...
- But when I open it, then it doesn't show root on the system, just the installed app.

- So I tried to install the magisk,zip via TWRP and tadaaaaa "ass ****ed" because TRWP doesn't decrypt my partitions..

So I don't have root right now,
because the fastboot method somehow fails
and the TRWP method won't work until the mighty devs have solved the decryption issue :confused:

So I have two questions...
First, are my partitions encrypted in every scenario (like without Password or Display Lock), because then would TWRP become pretty useless until updated.

And my second question: Has anyone any idea what I may have missed getting Magisk working?

Any help on this issue would be highly appreciated.
The only thing I could try is to wipe my device (I already copied 100 GB of personal data and App backups :rolleyes:)
And install the ROM via fastboot this time and doing the magisk install also via fastboot while I don't install TWRP Recovery?

I hope I could express my problem and myself properly
Click to expand...
Magisk can be installed simply from TWRP. If you need your own version of Magisk, install it in TWRP via an OTG adapter from a flash drive.
 
  • Like
Reactions: Sithlord512589
Hi all,

I have a Xiaomi 14 Pro CN version and have the bootloader unlocked with EU rom installed via NCUNLOCK but TWRP has not been installed so unable to install OTA updates. I thought they might have installed TWRP but did not and found out when I downloaded the latest HyperOs rom via updater and proceeded to install via recovery mode but it booted into the HyperOs Recovery Mode which was in Chinese (weird considering everything should be in your chosen language?) Now moving forward -

1. I presume the only way I can update ROM is through PC having phone in fastboot mode?
2. Is it possible to install TWRP without loosing any data or does the install process require data wipe? and if possible to install without wipe, can anyone please help me out with install please or share a tutorial link. I have read the install steps provided on Forum and I understand but I also don't want to do the wrong thing and stuff it up.

Thank you in advance,

Panda.
 
pandaz said:
Hi all,

I have a Xiaomi 14 Pro CN version and have the bootloader unlocked with EU rom installed via NCUNLOCK but TWRP has not been installed so unable to install OTA updates. I thought they might have installed TWRP but did not and found out when I downloaded the latest HyperOs rom via updater and proceeded to install via recovery mode but it booted into the HyperOs Recovery Mode which was in Chinese (weird considering everything should be in your chosen language?) Now moving forward -

1. I presume the only way I can update ROM is through PC having phone in fastboot mode?
2. Is it possible to install TWRP without loosing any data or does the install process require data wipe? and if possible to install without wipe, can anyone please help me out with install please or share a tutorial link. I have read the install steps provided on Forum and I understand but I also don't want to do the wrong thing and stuff it up.

Thank you in advance,

Panda.
Click to expand...
Yeah our only way is through PC or using USB-OTG through TWRP and flash it this way, TWRP cant decrypt /data partition.

Recovery for Xiaomi devices - Browse /shennong at SourceForge.net

List of relevant recovery in one place
sourceforge.net sourceforge.net

is the one for Xiaomi 14 Pro

Devices with Dedicated Recovery Partitions (A/B):
These devices have dedicated "recovery_a" and "recovery_b" partitions.
The custom recovery image can be flashed to "recovery_a" and "recovery_b" partitions directly.
Flashing to "recovery_ab" will flash to both "recovery_a" and "recovery_b" with a single command.
The custom recovery will persist across ROM updates.

Platforms: Snapdragon 685, 7/7s/7+/8/8+ Gen 1/2/3
Devices: cupid, diting, fuxi, garnet, houji, ingres, ishtar, marble(in), mayfly, mondrian, nuwa, shennong, socrates, tapas/topaz, thor, unicorn, zeus, ziyi
Image size: 100 MiB (104,857,600 bytes)
Installation:
Code:
fastboot flash recovery_ab recovery.img
fastboot reboot recovery
 
  • Like
Reactions: pandaz
TWRP for 14 series models is "broken" (cannot decrypt data partition).
1, yes, installing via fastboot works. If you would like to use TWRP only via the connected OTG-USB
2, Installing TWRP does not require wiping any data.
xiaomi.eu

Installing a Custom Recovery

All custom recoveries come in the format of an IMG file (some are released as a flashable ZIP, like OrangeFox, but there's still an IMG inside). However, installation method will differ, depending on where the recovery ramdisk resides on your device specifically. Failing to install the custom...
xiaomi.eu xiaomi.eu
 
  • Like
Reactions: pandaz
xMarvin732 said:
Yeah our only way is through PC or using USB-OTG through TWRP and flash it this way, TWRP cant decrypt /data partition.

Recovery for Xiaomi devices - Browse /shennong at SourceForge.net

List of relevant recovery in one place
sourceforge.net sourceforge.net

is the one for Xiaomi 14 Pro

Devices with Dedicated Recovery Partitions (A/B):
These devices have dedicated "recovery_a" and "recovery_b" partitions.
The custom recovery image can be flashed to "recovery_a" and "recovery_b" partitions directly.
Flashing to "recovery_ab" will flash to both "recovery_a" and "recovery_b" with a single command.
The custom recovery will persist across ROM updates.

Platforms: Snapdragon 685, 7/7s/7+/8/8+ Gen 1/2/3
Devices: cupid, diting, fuxi, garnet, houji, ingres, ishtar, marble(in), mayfly, mondrian, nuwa, shennong, socrates, tapas/topaz, thor, unicorn, zeus, ziyi
Image size: 100 MiB (104,857,600 bytes)
Installation:
Code:
fastboot flash recovery_ab recovery.img
fastboot reboot recovery
Click to expand...
Thanks for the reply mate!

If TWRP can't decrypt is there a point in installing TWRP? I mean updating ROM via PC shouldn't be a hard process as it has all the PC CMD required files to do so?
 
gogocar62 said:
TWRP for 14 series models is "broken" (cannot decrypt data partition).
1, yes, installing via fastboot works. If you would like to use TWRP only via the connected OTG-USB
2, Installing TWRP does not require wiping any data.
xiaomi.eu

Installing a Custom Recovery

All custom recoveries come in the format of an IMG file (some are released as a flashable ZIP, like OrangeFox, but there's still an IMG inside). However, installation method will differ, depending on where the recovery ramdisk resides on your device specifically. Failing to install the custom...
xiaomi.eu xiaomi.eu
Click to expand...
Thanks for the reply mate!

Updating rom via Fastboot mode doesn't wipe data correct?
 
Not if you use the "update rom" script.

Installing with Fastboot:
  • Download Xiaomi.eu ROM zip file
  • Extract the ROM zip to a new folder
  • Power off your device
  • Boot your device in Fastboot mode (Hold volume down + power buttons)
  • Connect to PC via USB cable
  • Run one of the installation scripts (according to your PC operating system):
    - first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
    - update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
  • Done!
xiaomi.eu

HyperOS 1.0 - HyperOS 1.0 STABLE RELEASE

Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu xiaomi.eu

You may need the appropriate drivers on your PC. https://xiaomi.eu/community/threads/installing-xiaomi-drivers-for-pc.73382/post-729299
 
gogocar62 said:
Not if you use the "update rom" script.

Installing with Fastboot:
  • Download Xiaomi.eu ROM zip file
  • Extract the ROM zip to a new folder
  • Power off your device
  • Boot your device in Fastboot mode (Hold volume down + power buttons)
  • Connect to PC via USB cable
  • Run one of the installation scripts (according to your PC operating system):
    - first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
    - update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
  • Done!
xiaomi.eu

HyperOS 1.0 - HyperOS 1.0 STABLE RELEASE

Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu xiaomi.eu

You may need the appropriate drivers on your PC. https://xiaomi.eu/community/threads/installing-xiaomi-drivers-for-pc.73382/post-729299
Click to expand...
awesome! thanks for info - I had the EU rom install done by NCUNLOCK so I can only presume he installed the drivers as he installed via Fastboot but I can try run the update_rom script and if it doesn't recognise device, I will proceed with installing drivers.

One other question, my recovery mode is in Chinese language - is it possible to change to eng? everything else is in eng but not that.

Cheers.
 
Hi, I have a Xiaomi 14 CN version, BL unlocked and with stable version of hyper os installed. Now I have checked and found the new release of OS. I cannot install it through the updater, I don't have TWRP, so the last solution is via fastboot. My question is: where can I download the right update OS? Can you send me the link? Its zip file already has the script for updating? If not, what is the right procedure for updating? Thank you in advance
 
matpack said:
Hi, I have a Xiaomi 14 CN version, BL unlocked and with stable version of hyper os installed. Now I have checked and found the new release of OS. I cannot install it through the updater, I don't have TWRP, so the last solution is via fastboot. My question is: where can I download the right update OS? Can you send me the link? Its zip file already has the script for updating? If not, what is the right procedure for updating? Thank you in advance
Click to expand...
i feel like being nice today


this is the Update for the Xiaomi 14
if you are on PC, extract it and run windows_fastboot_update_rom.bat
If you had root before, make sure to take out the boot.img and patch it with Magisk or KernelSU.
 
Hello, all!
My phone is Mi 11 Lite 5G (renoir)
I have a bootloop after updating Magisk module - Play_Integrity_fix to version 17.9
I know that I can delete this module from /data/adb/modules
I load TWRP but can't mount data because I cant enter pattern password that I use.

So the question is How can I decrypt data with pattern if TWRP give me only keyboard for entering password?
 
Simez said:
Hello, all!
My phone is Mi 11 Lite 5G (renoir)
I have a bootloop after updating Magisk module - Play_Integrity_fix to version 17.9
I know that I can delete this module from /data/adb/modules
I load TWRP but can't mount data because I cant enter pattern password that I use.

So the question is How can I decrypt data with pattern if TWRP give me only keyboard for entering password?
Click to expand...
the password will be the exact pattern you used for unlocking.
imagine it as a dial pad from old flip phones.

Also, you can access the data partition without decrypting, only your internal storage cant be accessed, but if you go into /data/adb/modules
it will be just fine.
 
Hello everybody, i just found out a new twrp version for houji, but is for android 15. i don't know, but it works on android 14? thanks
 
My Devices is now working TWRP with help dfe.2.6.force.auto2.zip flash :)
now i can flash ROM in twrp and Magisk V28
 
It should work mi 14 with internal storage in my device 14 pro did Same and someone told me to use neo dfe

for auto install only HyperOS dfe.2.6.force.auto2.zip
for custom ROM dfe.2.6.0b1.5forcelegacy.zip

github.com

Releases · leegarchat/dfe-neo-v2

Contribute to leegarchat/dfe-neo-v2 development by creating an account on GitHub.
github.com github.com

That I did
 
You must log in or register to reply here.

Similar threads

Rayglobe
Xiaomi 14 Ultra [TWRP]
Replies
25
Views
9K
Xiaomi 14 / Pro / Ultra
FastRider
F
Z
XIAOMI 14 PRO DEAD AFTER UPGRADING ROM USING TWRP
Replies
7
Views
2K
Xiaomi 14 / Pro / Ultra
aajdf
A
gogocar62
Fix_SIM_ Xiaomi 14 Global verzion
Replies
49
Views
12K
Xiaomi 14 / Pro / Ultra
alexis21
alexis21
A
Missing sound when recording a call
Replies
2
Views
469
Xiaomi 14 / Pro / Ultra
AndreyXiaomi
A
B
14 Pro - Aptx Lossless
Replies
0
Views
411
Xiaomi 14 / Pro / Ultra
blomkvistkalle30
B
Top Bottom
Back