TWRP / Orangefox recovery for Redmi Note 9 Pro (Joyeuse)


Hi guys, My device is Redmi Note 9 Pro QJZMIXM (Joyeuse) which I have officially unlocked and installed xiaomi.eu V11.0.4.0.QJZMIXM (stable) without TWRP.

I have 3 questions regarding the unofficial TWRP installation and I would appreciate your help.

1st Question:

Do I need to wipe format data to decrypt the device even though I have already installed xiaomi.eu rom ?

2nd Question:

As I can see at the moment there are 2 unofficial versions.
TWRP 3.4.0-14 by mauronofrio / LR.TWRP 3.4.1B 0530 by russian

Which one of those 2 is considered more stable with less bugs ?

3rd Question:

On the 1st post installation instructions for TWRP 3.4.0-14 by mauronofrio the installation procedure is for devices that already has TWRP.
Are there any instructions to directly install TWRP 3.4.0-14 by mauronofrio for the first time without any pre-existing TWRP already installed ?

In order to avoid any mistakes do you suggest to install first the russian version and then follow the instructions for upgrading to mauronofrio's TWRP ?
 
1. Question is, do you have decrypted Data partition?

2. Both, TWRP (Maurunofrio) and LR.TWRP (from Russian pages) are good.

3. It is possible to install TWRP directly, but instructions are in Czech language, see 1st post. Look for this text:

"instructions in czech language (use Google translator) -> you have to log in there to see pictures"

Its easier for you install LR.TWTP by automatic installer and then from it install TWRP.
 
Last edited:
Thanks for the quick reply.

I don't know if I have decrypted partition so I plan to follow the steps in the 1st post exactly to avoid any problems.
I will install russian version first as you suggest prior updating to Maurunofrio's TWRP.
 
idealismdrifter said:
Thanks for the quick reply.

I don't know if I have decrypted partition so I plan to follow the steps in the 1st post exactly to avoid any problems.
I will install russian version first as you suggest prior updating to Maurunofrio's TWRP.
Click to expand...
Follow the instructions carefully and you will succeed.
 
Hi, I am writing to give feedback about my progress.
I had a success in installing the russian TWRP and afterwards installing the Maurunofrio's TWRP.
I formatted data as per instructions to decrypt the partition.
I successfully installed MIUI 12.1 stable.
One thing that didn't go as expected though was that I couldn't copy the rom file from pc to internal rom.
The transfer was failing and I had to use an external SD card to transfer the rom.

I also successfully installed module MagiskHide Props Config v5.3.6 as per LeX1991's instructions.

Regarding Adaway installation, I would like to share my experience as it might help others.
Adaway was failing to update the hosts files for some reason giving an "Adaway remount failed" message.
The problem was solved by enabling "Systemless host" on Magisk's Settings menu and rebooting phone prior attempting to update hosts again through Adaway.

Many thanks to rbarat and LeX1991 !
 
idealismdrifter said:
Hi, I am writing to give feedback about my progress.
I had a success in installing the russian TWRP and afterwards installing the Maurunofrio's TWRP.
I formatted data as per instructions to decrypt the partition.
I successfully installed MIUI 12.1 stable.
One thing that didn't go as expected though was that I couldn't copy the rom file from pc to internal rom.
The transfer was failing and I had to use an external SD card to transfer the rom.

I also successfully installed module MagiskHide Props Config v5.3.6 as per LeX1991's instructions.

Regarding Adaway installation, I would like to share my experience as it might help others.
Adaway was failing to update the hosts files for some reason giving an "Adaway remount failed" message.
The problem was solved by enabling "Systemless host" on Magisk's Settings menu and rebooting phone prior attempting to update hosts again through Adaway.

Many thanks to rbarat and LeX1991 !
Click to expand...
Thanks for your nice participation!
About Adaway or HOSTS file modification you should use adguard dns. I switched to it and seems to perfectly work.
No more need to root.
 
LOLO9393 said:
Thanks for your nice participation!
About Adaway or HOSTS file modification you should use adguard dns. I switched to it and seems to perfectly work.
No more need to root.
Click to expand...

Hi ! When I first got the phone I tried Adguard DNS but for some reason it couldn't block the ads inside apps. Then I tried a similar app called DNS66 which worked perfectly fine on my device all this time prior rooting.
 
GOOD DAY!! II HAVE SUCCESSFULLY INSTALLED TWRP AND SUCCESSFULLY FLASH XIAOMI.EU V12. ALL I CAN I SAY IS I LOVEEEEEEEEEEEEEEEEEEEEE IT!! THANK YOU THANK YOU SO MUUUUUUUUUCHH!
 
Can someone please explain to me why i don't have "sytem" on wipe page?
I need to wipe the system to install MiuiMix but no matter if i mount it or not, it isn't there.
Tried both twrp's.
 
RootFreak said:
Can someone please explain to me why i don't have "sytem" on wipe page?
I need to wipe the system to install MiuiMix but no matter if i mount it or not, it isn't there.
Tried both twrp's.
Click to expand...
That's a good reason, because you shouldn't wipe system! Never.
But you are your boss.
 
  • Like
Reactions: RootFreak
RootFreak said:
Can someone please explain to me why i don't have "sytem" on wipe page?
I need to wipe the system to install MiuiMix but no matter if i mount it or not, it isn't there.
Tried both twrp's.
Click to expand...
On Android 10 phones, it's new superpartition, hence no more system wiping possible as it was on older phones during flashing new ROM. This is what I gathered, correct me if I'm wrong.
 
  • Like
Reactions: RootFreak, geoorg and LOLO9393
So I've been having some difficulties with this method. I don't use the EU phone, I use the global phone (joyeuse). I followed all the instructions exactly and for what it's worth, it works. However, it flashes my phone with the eu package and I don't want to use that version. I bricked my phone a dozen times trying to put it back on the global version. Today I finally figured it out. We DO NOT have to use Curtana.

FOR PEOPLE THAT WANT TO GO BACK TO GLOBAL ROM (JOYEUSE)

Prerequisites:

Download both the ota update and the stock rom from link below.
Be prepared to brick your phone a time or two.

After following all original instructions and finding yourself wanting to ditch Curtana:

Step 1. Reboot into fastboot and flash stock recovery from downloaded and extracted stock rom.
Step 2. Reboot into recovery to confirm that it is now working.
Step 3. Reboot back into fastboot and install TWRP like before. (DO NOT PROCEED TO ABOVE STEP 12)
Step 4. Reboot into TWRP recovery, wipe data, and install miui_JOYEUSEGlobal_V12.0.1.0.QJZMIXM_c98b027c0f_10.0.zip instead. THIS WILL CAUSE A BRICK. LET IT. (I discovered that the only thing bricked was the recovery, the rest of the system is fine.)
Step 5. Reboot into fastboot and run BOTH twrp installers back to back. Reboot into recovery to confirm that it works. Flash magisk while you're in there and wipe dalvik/cache.
Step 6. Reboot phone and enjoy! You now have original stock global rom, latest version, magisk root, and TWRP recovery.

Note: If magisk is not passing safety net tests make sure to enable magisk hide, hide from google play services, and follow termux instructions mentioned in original steps.

Download links

For stock rom: https://xiaomifirmwareupdater.com/miui/joyeuse/stable/V12.0.1.0.QJZMIXM/ (download both packages).
 
infyrno676767 said:
I followed all the instructions exactly and for what it's worth, it works. However, it flashes my phone with the eu package and I don't want to use that version.
Click to expand...
I don't know how you managed to do that since the op link points to the global version QJZMIXM and not the EU version QJZEUXM
FWIW i have an EU (JOYEUSE) note 9 pro with original firmware 11.0.4 QJZEUXM and updated to 12.0.1 QJZMIXM following the step by step guide from the first post and everything F*rocks!!
 
RootFreak said:
I don't know how you managed to do that since the op link points to the global version QJZMIXM and not the EU version QJZEUXM
FWIW i have an EU (JOYEUSE) note 9 pro with original firmware 11.0.4 QJZEUXM and updated to 12.0.1 QJZMIXM following the step by step guide from the first post and everything F*rocks!!
Click to expand...

I'm not sure but when I click on the link in the op I get the EU version. This is what it currently points to: https://sourceforge.net/projects/xi...e9ProEU_V12.0.1.0.QJZMIXM_v12-10.zip/download.

I noticed a lot of odd differences when I finished originally and when I went in to my about device menu as well as on Termux I noticed that it was indeed the EU version. Didn't really care for it in all honesty. It felt like I was using an LG phone.

I've been running stock with each update as it comes out and magisk. Figured it was time to look into TWRP again and see if there was anything yet. Couldn't be happier!
 
Mein Mobil Redmi Note 9S Curtana.
Jetzt habe ich das Problem, dass ich bereits mit der mitgelieferten ROM-Version (heute miui 12.02), wenn ich TWRP mit dem Xiaomitoolv2 installieren, habe ich kein "System" in "wischen / vorwärts".
"System" kann also nicht peitschen!
Das Handy ist jedoch korrekt entsperrt.
TWRP startet auch richtig!

Was könnte das sein? Ich finde nirgendwo einen Hinweis darauf.
Es wäre schön, eine Antwort zu bekommen.
 
Redmi Note 9 Pro JOYEUSE
33874
I recently installed TWRP-3.4.1B-0530-joyeuse-fix.
Then I installed twrp-3.4.0-14-curtana-unified-mauronofrio.img.
After rebooting from twrp to twrp, the red line is displayed in twrp.
See the photo under the spoiler.
Is this a bug or can I ignore it?
 
Last edited:
EU_User said:
Redmi Note 9 Pro JOYEUSE
View attachment 33874
I recently installed TWRP-3.4.1B-0530-joyeuse-fix.
Then I installed twrp-3.4.0-14-curtana-unified-mauronofrio.img.
After rebooting from twrp to twrp, the red line is displayed in twrp.
See the photo under the spoiler.
Is this a bug or can I ignore it?
Click to expand...

Just use orange fox twrp, its beta, but its very stable, everythingh works just fine.
 
  • Like
Reactions: sir_bazz and patrickdrd
EU_User said:
Redmi Note 9 Pro JOYEUSE
View attachment 33874
I recently installed TWRP-3.4.1B-0530-joyeuse-fix.
Then I installed twrp-3.4.0-14-curtana-unified-mauronofrio.img.
After rebooting from twrp to twrp, the red line is displayed in twrp.
See the photo under the spoiler.
Is this a bug or can I ignore it?
Click to expand...
It doesn't happen to me. Did you install it correctly? Did you format the Data?
 
You must log in or register to reply here.

Similar threads

G
Redmi Note 9: twrp and encrypted files
Replies
3
Views
2K
Redmi Note 9S / Pro / Max / ProEU
gogocar62
gogocar62
M
Redmi Note 11
Replies
1
Views
1K
Redmi Note 11 / Pro / 11EPro / POCO X4 Pro5G
sadtango289
S
N
Sometimes I can't pay with the NFC of my bank application
Replies
0
Views
330
Redmi Note 12
necxx
N
A
Invalid Google play not certified Redmi Note 10 Pro (sweet) MIUI14
Replies
10
Views
8K
Bugs
Matej40
M
Migsse
Redmi Note 13 4G NFC Sapphiren Can't update to OS1.0.8.0.UNHMIXM
Replies
10
Views
1K
Questions & Answers
NOSS8
N
Top Bottom
Back