XperianPro
Members
- 26 Oct 2013
- 648
- 82
[ROM][Official][4.4.4] CyanogenMod 11.0 Nightlies for the Xiaomi MI2 (aries)
- Thread starter M1cha
- Start date
annihilator
Members
- 27 Jul 2013
- 1,103
- 132
should be enough.. but i think it does not hurt.
i have a galaxy nexus with cm11, when i use the cm updater there, it does everything automatic, even dalvik wipe. (i think you can see it when android is optimizing the apps during boot)
on the other hand (mi2) with cwm i can use the updater and it boots in CWM and let me decide which sys i want to update (somehow clear because of tdb), then it automatic installs the rom but stays in CWM and does not reboot.
In the end it doesn't hurt if i then press manually wipe cache&dalvik, even if it is already done by the automatic routine.
whatever, worst case it that it is buggy and you have to manually wipe cache and dalvik later, would be also not a big deal.
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
When cwm recovery get aosp commands to run at boot it automatically wipes dalvik and cache, so you don't need to wipe them again after the auto flash. I'll add a few other FAQsshould be enough.. but i think it does not hurt.
i have a galaxy nexus with cm11, when i use the cm updater there, it does everything automatic, even dalvik wipe. (i think you can see it when android is optimizing the apps during boot)
on the other hand (mi2) with cwm i can use the updater and it boots in CWM and let me decide which sys i want to update (somehow clear because of tdb), then it automatic installs the rom but stays in CWM and does not reboot.
In the end it doesn't hurt if i then press manually wipe cache&dalvik, even if it is already done by the automatic routine.
whatever, worst case it that it is buggy and you have to manually wipe cache and dalvik later, would be also not a big deal.
Lol its not needed to tell when we get a new build. we have nightlies so every day (except when there are troubles ) we get a new one
Sent from my nexus 7
Last edited:
annihilator
Members
- 27 Jul 2013
- 1,103
- 132
- 29 May 2011
- 1,747
- 297
Please check your Model Number in the next nightly's because I added a mi2s detection.
it should show "MI 2" or "MI 2S". check if it's correct. If it'll show "MI 2?" there are more SoC's than we know about.
it should show "MI 2" or "MI 2S". check if it's correct. If it'll show "MI 2?" there are more SoC's than we know about.
OK thanks a lot. I have a Mi2s, i'll let u know. Besides, the latest nightly works like a charm.
Inviato dal mio MI 2 utilizzando Tapatalk
My phone model is Mi2s,but It's show Mi2.
Attachments
He said starting from the next nightly, not this
Inviato dal mio Cyanotico Mi2S.
Ops, sorry for the double-same answer XD
Firstly: you're great, cm works like a charm, and battery life is great (sadly, i think xiaomi services drain a lot of battery)
But i wuold like to ask you, probably you know more than a lot of people out there. So, there are some differences between mi2 and mi2s: the most important is the different cpu (spapdragon s4 pro vs. snapdragon 600); than it comes the camera (only in mi2s 32gb model), which is completly different from the 8MP from mi2 model (either the vendor is different, it's made by sony if i'm not wrong). The boring thinng is the missing driver for this model (a camera which should perform better, without right drivers made worse photos).
as previously said, there is a different cpu. So, i would like to know, the snapdragon 600 is just a s4 pro clocked at higher frequency or is somehow different? Are there different drivers too? Are those drivers included? Or my phone is not "used" at 100% of its capabilities (mi2s)?
Sorry for the looooong question, but it was something that i was thinking about (since the day i noticed that mi2 and mi2s has the same installation package, either for miui)
Thank you!
But i wuold like to ask you, probably you know more than a lot of people out there. So, there are some differences between mi2 and mi2s: the most important is the different cpu (spapdragon s4 pro vs. snapdragon 600); than it comes the camera (only in mi2s 32gb model), which is completly different from the 8MP from mi2 model (either the vendor is different, it's made by sony if i'm not wrong). The boring thinng is the missing driver for this model (a camera which should perform better, without right drivers made worse photos).
as previously said, there is a different cpu. So, i would like to know, the snapdragon 600 is just a s4 pro clocked at higher frequency or is somehow different? Are there different drivers too? Are those drivers included? Or my phone is not "used" at 100% of its capabilities (mi2s)?
Sorry for the looooong question, but it was something that i was thinking about (since the day i noticed that mi2 and mi2s has the same installation package, either for miui)
Thank you!
Apparently I've got a MI 2 instead of MI 2S
(I've bought a mi2s...). Also attached in the SET CPU device info, maybe that'll give you an idea of which SoC my model has.Is it now 100% certain I have a MI 2 instead of a MI 2S?
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Check with CPUzApparently I've got a MI 2 instead of MI 2S
Is it now 100% certain I have a MI 2 instead of a MI 2S?View attachment 8026 View attachment 8026 View attachment 8027
Sent from my mi²s
- 29 May 2011
- 1,747
- 297
Still, the June 18th nightly will be the first one which can detect your phone model.Apparently I've got a MI 2 instead of MI 2S
Is it now 100% certain I have a MI 2 instead of a MI 2S?
All CM builds until now don't care about your phone and do always show "MI 2"
Correct me if I'm mistaken, but these are the right specifications for the Mi2S right?
Thanks for the info (and all the hours put into CM11!).
Attachments
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Yep, its because the other apps just reas build.prop and get Info from an online database, cpuz read soc Info, not just build.prop
Sent from my mi²s
I've got a weird problem with CM11 (latest nightly currently available). When my screen is off/locked, I can't turn it on again. The button on the side (below volume down) doesn't turn on the screen. I can hear messages arriving and music still plays, so Android is still running. T
Any ideas? I'm using CPU tuner to switch governor to conservative (384-594MHz) and Ondemand (384-1728MHz) when screen is on. I've tried Set CPU also, and disabling CPU trotteling altogether, but that doesn't fix my problem.
Any ideas? I'm using CPU tuner to switch governor to conservative (384-594MHz) and Ondemand (384-1728MHz) when screen is on. I've tried Set CPU also, and disabling CPU trotteling altogether, but that doesn't fix my problem.
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Last edited:
Similar threads
