[rom] Ivan's Aosp Marshmallow 6.0 - [6.3.22]


Well I've heard that you needs to upload the new version So I will upload the original author Autumn leaves in the wind, Ivan

The original post http://weibo.com/1697247850/De8pNxtEq? Type = the comment

Download https://www.dropbox.com/s/implr82lsqixvxw/aosp-aries-6.1.20-9YAoidKGMO-6.0.zip? Dl = 0

Listen up I just uploaded So I can't answer for the problem of all have a problem? You know how to feedback I'm just easy to upload your download.

How to install I don't think that I say more The post has said. This is so. Ha ha have a good time. All thank you for the great author.
 
  • Like
Reactions: cbpbxecmecmbeh, heron and .bastian
Testing since one day. It is a little bit too early but I can say it is super fast and notifications are not delayed too much in wifi (within 1 minute)
 
I tried this rom, but it did not start. My configuration:
Copied the Rom aosp-aries-6.1.20-9YAoidKGMO-6.0.zip to sd.
Started (TWRP) recovery.
Wiped Data, Cache and System.
Flashed rom (messages showing flashing and succesfull, but as last output it said: "Not possible to mount System.")
Reboot.

Now after a few seconds the Mi-logo appears and nothing else happens. Had to pull battery to start recovery again.
Tried to flash a second time: same result.
Went back to (backup of) Last Hope RC3.

What did I do wrong?
 
Paulus123 said:
I tried this rom, but it did not start. My configuration:
Copied the Rom aosp-aries-6.1.20-9YAoidKGMO-6.0.zip to sd.
Started (TWRP) recovery.
Wiped Data, Cache and System.
Flashed rom (messages showing flashing and succesfull, but as last output it said: "Not possible to mount System.")
Reboot.

Now after a few seconds the Mi-logo appears and nothing else happens. Had to pull battery to start recovery again.
Tried to flash a second time: same result.
Went back to (backup of) Last Hope RC3.

What did I do wrong?
Click to expand...

Well I've got this problem when I try flash another cm12.1 from miui.com, and someone says its failed because use TWRP to wipe system, when you finish wipe system, the system will mounted and cannot unmount. Maybe it have some bugs.
By the way if you try this rom, try to use ivan's cwm recovery, and you can change another recovery when you finish flash.
 
Last edited:
Hi! i tried to install this rom, but it fails and the message is:
"E: Error executing updater binary in zip '/sdcard/aosp-aries-6.1.20-9YAoidkGMO-6.0.zip' "

i do the usual: format system, data , cache an dalvik and using TWRP V2.8.7.0.

What i'm doing wrong?

edit: it work if i left another rom installed, then wipe and reinstall

edit2: i get the message E:Unable to mount '/system'
 
Last edited:
DeAkion said:
You can get it from this Link, password: 04mi, it from this Thread. But it's chinese version. @.bastian(maybe you have english version?)
Click to expand...

The link is from ROM 5.12.8. Installing this ROM update the recovery to cmw?

by the way, in the first page of this thread you have the link in a mirror for fast download.

Thanks
 
Tested it for a couple of hours. It's stable and butter smooth. I've never seen my Mi2S so smooth.

Also Android M includes some useful stuff that was CM-only before and I love it.

But the camera crashes (why is it called "Qualcomm camera" anyway?). And the phone becomes very laggy if downclocked. I ran my phone @.9GHz max for years without any slowdown. Until now.

This ROM is almost ready. But not enough for me.
(I've just restored my MK51.1 backup)
 
Last edited:
Paulus123 said:
I tried this rom, but it did not start. My configuration:
Copied the Rom aosp-aries-6.1.20-9YAoidKGMO-6.0.zip to sd.
Started (TWRP) recovery.
Wiped Data, Cache and System.
Flashed rom (messages showing flashing and succesfull, but as last output it said: "Not possible to mount System.")
Reboot.

Now after a few seconds the Mi-logo appears and nothing else happens. Had to pull battery to start recovery again.
Tried to flash a second time: same result.
Went back to (backup of) Last Hope RC3.

What did I do wrong?
Click to expand...

just flashed it to try, and these are the steps with let me the installation succeeded.

prerequisites:
- TWRP compatible with merged system partitions [link]
- a fastboot package of latest development MIUI ROM for aries [link]
- MiFlash installed and fully working

installation steps:
- backup all your stuff the way you want [cloud copy/paste, mobile to pc transfer, etc.]
- reboot your phone in fastboot mode and connect it to your pc
- start MiFlash and check if the phone is found
- browse for the fastboot images within your pc [you have to download and extract the .tar file linked above]
- in advanced properties, select "flash_all.bat" into your fastboot folders
- click flash and wait for the phone to reboot [it will take almost 10 minute for the first startup]
- once booted, skip all the MIUI configuration steps and power off your phone
- restart in fastboot mode [vol down + power]
- link the phone to your pc, and via adb push TWRP into it [fastboot flash recovery TWRP.. etc.]
- disconnect your phone from pc and remove battery
- reinsert your battery and start the phone in recovery mode [vol up + power]
- once TWRP started, allow modification to the file system swiping right
- connect your phone to your pc and move latest AOSP build into the internal memory
- wipe data - factory reset
- then flash AOSP via TWRP the standard way
- wait for about other 10 minutes for the ROM to start, then enjoy.
 
  • Like
Reactions: JankoTheRocker, kazin08 and treiliert
Well, I finally succeeded to install this.
The steps above did it (more or less):
  • Flash_all the first time did give a failure, something like "image too large", when writing the system img.
  • Tou have to select 'flash all' at the bottom of MiFlash before pressing the 'Flash' button
  • Repeatedly trying did not work.
  • Finally removed the battery and started in fastboot again.
  • Now the flash_all did work!
It looks like many other people ran into this 'too large' problem.
Maybe after the first try the partitions were resided but fastboot did not 'pickup' these changes...

Anyhow, I'm on AOSP now. Thanks for your help!
 
  • Like
Reactions: DeAkion
oile said:
Testing since one day. It is a little bit too early but I can say it is super fast and notifications are not delayed too much in wifi (within 1 minute)
Click to expand...

When you plug in it didn't show up some dialog like let you choose usb connect mode? Maybe you can find the option in developer options. :)
 
kazin08 said:
Hi! i tried to install this rom, but it fails and the message is:
"E: Error executing updater binary in zip '/sdcard/aosp-aries-6.1.20-9YAoidkGMO-6.0.zip' "

i do the usual: format system, data , cache an dalvik and using TWRP V2.8.7.0.

What i'm doing wrong?

edit: it work if i left another rom installed, then wipe and reinstall

edit2: i get the message E:Unable to mount '/system'
Click to expand...
Try again. After three attempts it works. It's recoverys issue

Sent from my MI 2 using Tapatalk
 
  • Like
Reactions: kazin08
i found a issue:

bluetooth audio isn't working.
When i go to set the APN sistem get FC.

for now, this rom it's too smooth, and now i'll test the alarm

edit: the alarm works, but i will test better in the week. Any solution for the bluetooth audio?
 
Last edited:
You must log in or register to reply here.

Similar threads

zues121510
Ongoing issues with Xiaomi EU rom on xiaomi, have not been able to fix at all.
Replies
5
Views
1K
Questions & Answers
ap83389
A
ingbrzy
  • Locked
  • Sticky
MIUI 11 MIUI 11.0 STABLE RELEASE
Replies
3K
Views
1M
MIUI 11
ShockWave789
ShockWave789
Igor Eisberg
  • Locked
Known Issues (Weekly ROM)
Replies
2K
Views
2M
Bugs
Oscopoldo
O
ingbrzy
  • Locked
  • Sticky
MIUI 10 MIUI 10 STABLE RELEASE
Replies
3K
Views
3M
MIUI 10
Pedro Fernandes
Pedro Fernandes
kamakasnh
[rom][official] Flyme 5 [rom][unofficial] Cm-based And Aosp-based Flyme 5
Replies
21
Views
6K
Xiaomi Mi 2 / Mi 2S
kamakasnh
kamakasnh
Top Bottom
Back