- May 17, 2013
- 197
- 48
============================================================
DISCLAIMER: I DO NOT RESPONSIBLE OF ANY PHONE BRICKED. USE WISELY AND DO IT IF YOU KNOW WHAT YOU ARE DOING. FOLLOW INSTRUCTIONS AND READ CAREFULLY.
============================================================
Brought you guys some tweaks and extrassss..
Screen Shots:
Snapdragon BatteryGuru added!
- for battery saving! about 2-3%/hr [Normal 4%]
Features:
based on latest 3.6.28 Multi-Lang ROM
Ext4 Tweaks
Init.d Support
Latest Busybox 1.21.0 [pre-Installed]
Viper4Android XHiFi ver 2102
Snapdragon BatteryGuru
Latest 1.15r NOS-Injection Tweak :
-Entropy
-Sqlite3
-Zipalign
-GPS tweak
- logcat for Nos-Injection
- added builproptweaks
- some Kernel tweaks from Sysctl.Conf
- Calibrates Battery
- DNS Caching
Recommended Install Instruction[FULL WIPE Method]
1. Make sure you have CWM - Test by going System Updater>Reboot to Recovery, make sure its CWM~Clock Work recovery Mode
2. Make a FULL backup either in CWM or Titanum Backup [All User APPs and System Data[Setting storage, SMS storage, etc etc...]
3. Wipe Dalvik in Advanced Menu
4. Format /System , /Data and /Cache in Mount/Format Menu [or Flash THIS zip]
5. Flash the this ROM through Install Zip from SDCARD.
6. Reboot. If the CWM ask anything bout replacing recovery or ROOT .... just select BACK till it reboot itself. Do NOT try to be funny on this.
7. Let it settle in lockscreen for about 1 minutes. Then reboot again.
8. Restore User Apps and System data using Titanum Backup
9. ENJOY THE SPEEEDDDD!!!!!!
NOT-SO Recommended Instruction [Preserve user DATA]
A: Please backup data just in case
1. Boot into CWM
2. Flash this ROM and restart. Follow extra instruction on each release at download link area.
3. If you have alot of force close... you need to follow the Recommended Instruction above.
P/S In case the NOS_Injection LOGS file are not found in /data/direct_inject
You can place them manually.
1. Using R@@t Explorer and browse to /Data
2. Press R/W button on the top
3. Create a folder "direct_inject" without quotes.
4. Restart and check back again in this folder. Should the logs are there. [Few bytes on each logs]
Some useful tips for long lasting battery !
1. Setting Mobile Network> Manual Selection
2. Google Sync - Turn OFF whichever you not using. eg. i turn ON only for contacts and calendar
3. Turn off any vibration or sounds in SOUND menu.
3. Install SetCPU and set profiles like this:- [Priority in order!]
Battery level MAX CPU speed [Min :384 Hz]
Screen OFF 384 Hz
In Call 918 Hz
<15% 384 Hz
<30% 918 Hz
<55% 1.2 Ghz
<80% 1.5 Ghz
<100% Max CPU speed
Let me know your result!
HIT LIKE IF YOU LIKE IF I HELP YOU.
Donate me if you like. I had spent much time here.
Download link:-
V1
Link 1
Link 2
V1.1
Link 1
V1.2
Link 1
NOTE: PLEASE update the BUSYBOX to the LATEST version using "Busybox Free" included in this version.
After update then restart. Verify NOS-Injected by going through the LOG at /data/direct_inject/
V1.3
Link 1
Busy Box Installed!
Init.d Script added.
Latest NOS 1.15
V1.4
Latest NOS 3.0
Link 1
V1.5
Latest NOS 3.2.3 with new CPU TUNER tweak [Performance, Battery Life or Balanced]!
Include:
Init.d Toggler
Busybox FREE
ViperAndroid
Android Terminal
Download the latest BatteryGuru from here
Link 1
V1.6
Latest NOS3.2.6r4 - more improvements
Include:
Init.d Toggler
Busybox FREE
ViperAndroid
Android Terminal
Link 1
-Note: I install this without WIPING DATA.. just Flash this straight in CWM. It works!
====================IMPORTANT!!!!============================
1. After obtain ROOT, then Exec Busybox> Install to /system/xbin while scanning
2. Execute Init.d Toggler>enable
RESTART.
Everything will work flawlessly!
To check go to:
/system/app/direct_inject/
see the logs and make sure its has something in it by checking the file size..
There is something wrong if the filesize is zero '0'.
DO this for MAXIMUM performance:
1. Activate Entropy by going to Terminal [download here : Link
2. type this without quoates "su" then "entropy"
3. Choose your option then it will restart your phone automatically.
4. Repeat this steps for "rambooster" and "cputuner"
5. Enjoy the extra speed!
============================================================
Keynote:
For those having process.android.acore force close. It means you need to make a full wipe.
Flash the zip found at bottom of this post. Then re flash this ROM.
============================================================
V1.7 Codename changed to Operation Kill Joy by Exit_Only and other gang
Changes:
Added app :
Init.d Toggler
Busybox Free Installer
[This time really works!]
From OKJ
1.) 2 init.d script
2.) Entropy Generator
3.) Ext4 Tweaks
4.) Zero UI Lag
5.) Maxed out speed & Performance
6.) Disables most logging activities
7.) Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
8.) Multiple VM & Net tweaks
9.) RAM booster binary (Recover lost ram on the go without rebooting)
Instructions:
A: Make sure you have a working CWM in your recovery. If not follow this instruction HERE
1) If you come from Official M2/s Miui V5, just flash this in CWM.
2) Else, DO CWM BACKUP and then wipe by flashing my WIPE.zip in CWM. Then Flash this ROM.
3) Enable the Init.d Support by execute Init.dToggler. It should be there. If not report to me.
4) Restart and check the log at /data/killjoy/ with text viewer.
5) PROFITS!
Screenshots: Here
Link 1 - Google
Credit:
Exit_Only for Nos-Injection
Ryuinferno - Init.d Support
zhuhang - Viper4Android sound effect
.bastian for the mirror
Operation Kill Joy Team [OKJ]
@Ryuinferno
@LENAROX
@Koush
@CyanogenMod
@mw86
@idcrisis
@thomas.raines
@jrummy16
@kejar31
@kobridge
@zeppelinrox
@Chainfire
@ImbaWind
@GideonX
@RErick
@decialman
@castle_bravo
@dsexton
@Juwe11
@noobnl
TO ANYONE WISH TO MODIFIED OR DISECT THIS ROM TO MAKE IT BETTER, YOU ARE WELCOME TO DO SO. JUST GIVE ME A CREDIT.
DISCLAIMER: I DO NOT RESPONSIBLE OF ANY PHONE BRICKED. USE WISELY AND DO IT IF YOU KNOW WHAT YOU ARE DOING. FOLLOW INSTRUCTIONS AND READ CAREFULLY.
============================================================
Brought you guys some tweaks and extrassss..
Screen Shots:
Snapdragon BatteryGuru added!
- for battery saving! about 2-3%/hr [Normal 4%]
Features:
based on latest 3.6.28 Multi-Lang ROM
Ext4 Tweaks
Init.d Support
Latest Busybox 1.21.0 [pre-Installed]
Viper4Android XHiFi ver 2102
Snapdragon BatteryGuru
Latest 1.15r NOS-Injection Tweak :
-Entropy
-Sqlite3
-Zipalign
-GPS tweak
- logcat for Nos-Injection
- added builproptweaks
- some Kernel tweaks from Sysctl.Conf
- Calibrates Battery
- DNS Caching
Recommended Install Instruction[FULL WIPE Method]
1. Make sure you have CWM - Test by going System Updater>Reboot to Recovery, make sure its CWM~Clock Work recovery Mode
2. Make a FULL backup either in CWM or Titanum Backup [All User APPs and System Data[Setting storage, SMS storage, etc etc...]
3. Wipe Dalvik in Advanced Menu
4. Format /System , /Data and /Cache in Mount/Format Menu [or Flash THIS zip]
5. Flash the this ROM through Install Zip from SDCARD.
6. Reboot. If the CWM ask anything bout replacing recovery or ROOT .... just select BACK till it reboot itself. Do NOT try to be funny on this.
7. Let it settle in lockscreen for about 1 minutes. Then reboot again.
8. Restore User Apps and System data using Titanum Backup
9. ENJOY THE SPEEEDDDD!!!!!!
NOT-SO Recommended Instruction [Preserve user DATA]
A: Please backup data just in case
1. Boot into CWM
2. Flash this ROM and restart. Follow extra instruction on each release at download link area.
3. If you have alot of force close... you need to follow the Recommended Instruction above.
P/S In case the NOS_Injection LOGS file are not found in /data/direct_inject
You can place them manually.
1. Using R@@t Explorer and browse to /Data
2. Press R/W button on the top
3. Create a folder "direct_inject" without quotes.
4. Restart and check back again in this folder. Should the logs are there. [Few bytes on each logs]
Some useful tips for long lasting battery !
1. Setting Mobile Network> Manual Selection
2. Google Sync - Turn OFF whichever you not using. eg. i turn ON only for contacts and calendar
3. Turn off any vibration or sounds in SOUND menu.
3. Install SetCPU and set profiles like this:- [Priority in order!]
Battery level MAX CPU speed [Min :384 Hz]
Screen OFF 384 Hz
In Call 918 Hz
<15% 384 Hz
<30% 918 Hz
<55% 1.2 Ghz
<80% 1.5 Ghz
<100% Max CPU speed
Let me know your result!
HIT LIKE IF YOU LIKE IF I HELP YOU.
Donate me if you like. I had spent much time here.
Download link:-
V1
Link 1
Link 2
V1.1
Link 1
V1.2
Link 1
NOTE: PLEASE update the BUSYBOX to the LATEST version using "Busybox Free" included in this version.
After update then restart. Verify NOS-Injected by going through the LOG at /data/direct_inject/
V1.3
Link 1
Busy Box Installed!
Init.d Script added.
Latest NOS 1.15
V1.4
Latest NOS 3.0
Link 1
V1.5
Latest NOS 3.2.3 with new CPU TUNER tweak [Performance, Battery Life or Balanced]!
Include:
Init.d Toggler
Busybox FREE
ViperAndroid
Android Terminal
Download the latest BatteryGuru from here
Link 1
V1.6
Latest NOS3.2.6r4 - more improvements
Include:
Init.d Toggler
Busybox FREE
ViperAndroid
Android Terminal
Link 1
-Note: I install this without WIPING DATA.. just Flash this straight in CWM. It works!
====================IMPORTANT!!!!============================
1. After obtain ROOT, then Exec Busybox> Install to /system/xbin while scanning
2. Execute Init.d Toggler>enable
RESTART.
Everything will work flawlessly!
To check go to:
/system/app/direct_inject/
see the logs and make sure its has something in it by checking the file size..
There is something wrong if the filesize is zero '0'.
DO this for MAXIMUM performance:
1. Activate Entropy by going to Terminal [download here : Link
2. type this without quoates "su" then "entropy"
3. Choose your option then it will restart your phone automatically.
4. Repeat this steps for "rambooster" and "cputuner"
5. Enjoy the extra speed!
============================================================
Keynote:
For those having process.android.acore force close. It means you need to make a full wipe.
Flash the zip found at bottom of this post. Then re flash this ROM.
============================================================
V1.7 Codename changed to Operation Kill Joy by Exit_Only and other gang
Changes:
Added app :
Init.d Toggler
Busybox Free Installer
[This time really works!]
From OKJ
1.) 2 init.d script
2.) Entropy Generator
3.) Ext4 Tweaks
4.) Zero UI Lag
5.) Maxed out speed & Performance
6.) Disables most logging activities
7.) Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
8.) Multiple VM & Net tweaks
9.) RAM booster binary (Recover lost ram on the go without rebooting)
Instructions:
A: Make sure you have a working CWM in your recovery. If not follow this instruction HERE
1) If you come from Official M2/s Miui V5, just flash this in CWM.
2) Else, DO CWM BACKUP and then wipe by flashing my WIPE.zip in CWM. Then Flash this ROM.
3) Enable the Init.d Support by execute Init.dToggler. It should be there. If not report to me.
4) Restart and check the log at /data/killjoy/ with text viewer.
5) PROFITS!
Screenshots: Here
Link 1 - Google
Credit:
Exit_Only for Nos-Injection
Ryuinferno - Init.d Support
zhuhang - Viper4Android sound effect
.bastian for the mirror
Operation Kill Joy Team [OKJ]
@Ryuinferno
@LENAROX
@Koush
@CyanogenMod
@mw86
@idcrisis
@thomas.raines
@jrummy16
@kejar31
@kobridge
@zeppelinrox
@Chainfire
@ImbaWind
@GideonX
@RErick
@decialman
@castle_bravo
@dsexton
@Juwe11
@noobnl
TO ANYONE WISH TO MODIFIED OR DISECT THIS ROM TO MAKE IT BETTER, YOU ARE WELCOME TO DO SO. JUST GIVE ME A CREDIT.
