MI 11 ULTRA - Cases


Update about the original Xiaomi case.
Today i good lighting condition i found that it has a bulb where the volume rocker is, that's a bummer.
As promised pictures below..
 

Attachments

  • 1619882248829.jpg
    1619882248829.jpg
    316.9 KB · Views: 446
  • IMG_20210501_171511.jpg
    IMG_20210501_171511.jpg
    327.4 KB · Views: 446
  • IMG_20210501_171454.jpg
    IMG_20210501_171454.jpg
    230 KB · Views: 426
  • IMG_20210501_171528.jpg
    IMG_20210501_171528.jpg
    311.4 KB · Views: 405
Please show us how this looks and if it's real carbon fiber when it arrives.

Wouldn't call me an expert in this area but to me it seems to be real
 

Attachments

  • IMG_1909-1-01-01.jpeg
    IMG_1909-1-01-01.jpeg
    354.2 KB · Views: 388
  • IMG_1910-01-01.jpeg
    IMG_1910-01-01.jpeg
    341.2 KB · Views: 387
  • 1619943835085-01-01.jpeg
    1619943835085-01-01.jpeg
    612.5 KB · Views: 371
  • Like
Reactions: 4fun20
Wouldn't call me an expert in this area but to me it seems to be real
Looks pretty good to me.
The camera protection looks even better than the original case.
Does it easy slip on flat surfaces?
Or does it have a rubber coating?
 
Looks pretty good to me.
The camera protection looks even better than the original case.
Does it easy slip on flat surfaces?
Or does it have a rubber coating?

It does have a slight coating and it doesn't slip easily around.
 
  • Like
Reactions: 4fun20
Looks pretty good to me.
The camera protection looks even better than the original case.
Does it easy slip on flat surfaces?
Or does it have a rubber coating?
The carbon fiber ase has no camera protection. It's just a cutout for the camera module.
 
The carbon fiber ase has no camera protection. It's just a cutout for the camera module.

The case has around 1mm overlap for the camera module. So the module doesn't touch anything whilst lying on the table. If you want additional protection, add a tempered glass.
 
The case has around 1mm overlap for the camera module. So the module doesn't touch anything whilst lying on the table. If you want additional protection, add a tempered glass.
Thanks. Could you please share the name of shop or link on aliexpress?
 
Got my carbon case today and the quality is quite good, yes there is a hole for the Mic at the side.

Sent from my Mi 11 Ultra.
 
  • Like
Reactions: 4fun20
Hi, today i received the second case, it should be the one from the second post in this thread.
It feels very cheap plastic, no curves as suggested in the picture.
I recommend to not waste money for it ;-)
 

Attachments

  • 1620473294791-picsay.jpg
    1620473294791-picsay.jpg
    383.4 KB · Views: 308
Hi, I'm new here and this is my first post.
Here is an example for a bad case... and how it was advertised.. A "case" of "you get what you pay".
 

Attachments

  • IMG_20210516_091408.jpg
    IMG_20210516_091408.jpg
    997.5 KB · Views: 282
  • IMG_20210516_091500.jpg
    IMG_20210516_091500.jpg
    1.1 MB · Views: 284
  • IMG_20210516_091518.jpg
    IMG_20210516_091518.jpg
    1.1 MB · Views: 283
  • IMG_20210516_091551.jpg
    IMG_20210516_091551.jpg
    1.3 MB · Views: 281
  • Screenshot_20210516_092333_com.alibaba.aliexpresshd.jpg
    Screenshot_20210516_092333_com.alibaba.aliexpresshd.jpg
    644.6 KB · Views: 260
  • Like
Reactions: 4fun20
Hi, I'm new here and this is my first post.
Here is an example for a bad case... and how it was advertised.. A "case" of "you get what you pay".
Welcome.
The coloring doesn't look that bad.
Is it TPU?
The cutout for the camera module i hate too.
 
Welcome.
The coloring doesn't look that bad.
Is it TPU?
The cutout for the camera module i hate too.
I like the cut-out, yes it is tpu.
Here is one from an reply earlyer, in another colour:
 

Attachments

  • IMG_20210516_154632.jpg
    IMG_20210516_154632.jpg
    1.1 MB · Views: 234
  • IMG_20210516_154624.jpg
    IMG_20210516_154624.jpg
    1.4 MB · Views: 254
  • IMG_20210516_154610.jpg
    IMG_20210516_154610.jpg
    1.2 MB · Views: 233