[GUIDE][venus|star|mars] How to install Xiaomi.eu ROM for Xiaomi MI11 / Pro / Ultra


Attachments

  • Screenshot_2021-03-14-19-58-46-393_com.miui.securitycenter.jpg
    Screenshot_2021-03-14-19-58-46-393_com.miui.securitycenter.jpg
    378.9 KB · Views: 355
Just flashed stable ROM with no problem at all. Cross finger that it would be better on the battery department.
 
Karpfenhai said:
Creating Userdata seems to be buggy with Windows, I would try to concentrate on that since the flash process itself was working...

Note, “make_f2fs failed: 3221225477
fastboot: error: Cannot generate image for userdata“

This error usually means your Android sdk is not meant for the version you're about to install (to old) so ensure the binary which you are using is the one delivered with the rom.zip.

Also, some people advice to keep the folder name as short as possible.

Fastboot Commands: A Beginner’s Guide

With this guide of ours, you'll be able to learn all the fastboot commands and their syntax. We've also posted some hidden commands which you never knew.
android.tutorials.how android.tutorials.how

Fastboot is capable of formatting / erasing particular partitions, so formatting userdata can be done by yourself, just decompile the script and see if you can do the make2fs part manually, this should render the phone working again, flash eu rom once more, maybe on native Linux?

Regards.

Sent from my MI 8 Explorer Edition using Tapatalk
Click to expand...


At linux at the end it gives the following information:
Info: format successful
Sending 'userdata' (85 KB) OKAY [0.006s]
Writing 'userdata' OKAY [0.015s]
Erasing 'metadata' OKAY [4.719s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 7.788s
Rebooting OKAY [0.000s]
Finished. Total time: 0.202s.

Any ideas, please
 
Cacun said:
At linux at the end it gives the following information:
Info: format successful
Sending 'userdata' (85 KB) OKAY [0.006s]
Writing 'userdata' OKAY [0.015s]
Erasing 'metadata' OKAY [4.719s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 7.788s
Rebooting OKAY [0.000s]
Finished. Total time: 0.202s.

Any ideas, please
Click to expand...
Hmm, did you ran the full script first install format ? No errors and still Fastboot again?

We're slowly out of options, consider edl method with remote support then.

:(

Sent from my MI 8 Explorer Edition using Tapatalk
 
Karpfenhai said:
Hmm, did you ran the full script first install format ? No errors and still Fastboot again?

We're slowly out of options, consider edl method with remote support then.

:(

Sent from my MI 8 Explorer Edition using Tapatalk
Click to expand...

yes for both questions.
I will try the guarantee.
Thanks
 
coolqi said:
The new rom make the phone very heat and drain battery very fast..
Click to expand...
Hmm, anything obvious like Google stuff or gallery?

Check the main thread for further ideas (miui 12).

Regards.

Sent from my MI 8 Explorer Edition using Tapatalk
 
inzaghi75 said:
Did you flashed it with the fastboot clearing all data script? Did you restore your apps from the MIUI backup?
Click to expand...
Yup clearing all the data. I just clean all data in order to avoid any problem, I will have no problems if I select clean all.

Little update on Stable ROM battery : Seems my battery drain problem improved than the weekly ROM, will use it for another 2 or 3 day for feedback.

My first impression on the Stable ROM battery drain problem : https://xiaomi.eu/community/threads/21-03-11-xiaomi-mi-11-battery-absorption.60311/post-596683
 
Last edited:
Hello guys! I need your help..

My MI11 has a Global EU rom installed (12.0.3.0 RKBEUXM).

Can you explain me what does it means?

- Update China ROM to the latest via updater app first..

What is updater app? Which China ROM should I use?

thanks!!
 
davidep85 said:
Hello guys! I need your help..

My MI11 has a Global EU rom installed (12.0.3.0 RKBEUXM).

Can you explain me what does it means?

- Update China ROM to the latest via updater app first..

What is updater app? Which China ROM should I use?

thanks!!
Click to expand...
Guide is for Chinese version.. if you have Global version, update to latest Global ROM version.. just check for OTA if you are on latest version..
 
ingbrzy said:
Guide is for Chinese version.. if you have Global version, update to latest Global ROM version.. just check for OTA if you are on latest version..
Click to expand...
Ok, so altought xiaomi.eu is Based on China Stable/weekly is ok to start from 12.0.3.0 RKBEUXM (latest Global version)?

Thanks!
 
davidep85 said:
Hello guys! I need your help..

My MI11 has a Global EU rom installed (12.0.3.0 RKBEUXM).

Can you explain me what does it means?

- Update China ROM to the latest via updater app first..

What is updater app? Which China ROM should I use?

thanks!!
Click to expand...
"Updater App" means the App which is the default when you go to "My Device" .
Before you flash to Xiaomi eu ROM you have to update to lates CN ROM ....
 
Firedance61 said:
Test this, download and use WinRar to extract your tgz fastboot File, open and edit "flash_all.bat" with notepad++ and delete this first Lines (the red Lines in this Post), safe the file and flash with the latest MiFlash 2020.03.14
Don`t close your bootloader "clean all and lock" on CN Phones with Global Software. Only use "clean all" in MiFlash

fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *venus" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *venus" || exit /B 1

::check anti_version
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @echo "Antirollback check error" && exit /B 1

fastboot %* getvar crc 2>&1 | findstr /r /c:"^crc: 1" && if %errorlevel% equ 0 (
fastboot %* flash crclist %~dp0images\crclist.txt || @echo "Flash crclist error" && exit /B 1
fastboot %* flash sparsecrclist %~dp0images\sparsecrclist.txt || @echo "Flash sparsecrclist error" && exit /B 1
)
Click to expand...

Good afternoon!
I really need your help.
I already have my MI 11 bootloop on fastboot for about 3 days.
I have tried everything I have seen around here.
I tried as described and gives the following error on MiFlash 2021.2.26.0:
error: Not catch checkpoint (\ $ fastboot -s. * lock) .flash is not done.
I appreciate all the contributions.

My MI 11 seems to have the bootloader lock again. How do I unlock bootloader? I no longer have it on the xiaomi account and now on fastboot I can't login.
 
Last edited:
Cacun said:
My MI 11 seems to have the bootloader lock again. How do I unlock bootloader? I no longer have it on the xiaomi account and now on fastboot I can't login.
Click to expand...

I had the same problems as you in that I was stuck in fastboot mode after trying the flash the rom the first time. However the Mi Unlock tool could still see the phone and unlock it. I then neededto do a flash in EDL mode with the help of someone with an account. But you are saying the Mi Unlock tool is not even working for you?
 
viking27 said:
I had the same problems as you in that I was stuck in fastboot mode after trying the flash the rom the first time. However the Mi Unlock tool could still see the phone and unlock it. I then neededto do a flash in EDL mode with the help of someone with an account. But you are saying the Mi Unlock tool is not even working for you?
Click to expand...

No. I used MiFlashUnlock again and went back to unlock, but I'm still on fastboot.
Now flash done success, but restart in fastboot anyway. And I'm flashing the latest Global version
 
Last edited:
Same scenario as me then - I was stuck in fastboot not matter which rom I flashed or which method I used. EDL flash fixed it and was then able to flash EU rom with no issue.
 
Cacun said:
Good afternoon!
I really need your help.
I already have my MI 11 bootloop on fastboot for about 3 days.
I have tried everything I have seen around here.
I tried as described and gives the following error on MiFlash 2021.2.26.0:
error: Not catch checkpoint (\ $ fastboot -s. * lock) .flash is not done.
I appreciate all the contributions.

My MI 11 seems to have the bootloader lock again. How do I unlock bootloader? I no longer have it on the xiaomi account and now on fastboot I can't login.
Click to expand...

Pay someone to flash it under EDL mode, my phone was stuck in fastboot, and fixed by this method. Don't waste time to try any miflash. Not work at all.
 
Ok, maybe i¨ll get another try to install xiaomi.eu. So...
-lattest china (12.0.22 stable)
-download xiaomi.eu
-bl unlocked
-phone setted up with mi account
-fastboot
-original usb cable
-usb 2.0 port
-run the script as admin.


Am I missing something else or that¨s all i need?
 
Firedance61 said:
Test this, download and use WinRar to extract your tgz fastboot File, open and edit "flash_all.bat" with notepad++ and delete this first Lines (the red Lines in this Post), safe the file and flash with the latest MiFlash 2020.03.14
Don`t close your bootloader "clean all and lock" on CN Phones with Global Software. Only use "clean all" in MiFlash

fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *venus" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *venus" || exit /B 1

::check anti_version
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @echo "Antirollback check error" && exit /B 1

fastboot %* getvar crc 2>&1 | findstr /r /c:"^crc: 1" && if %errorlevel% equ 0 (
fastboot %* flash crclist %~dp0images\crclist.txt || @echo "Flash crclist error" && exit /B 1
fastboot %* flash sparsecrclist %~dp0images\sparsecrclist.txt || @echo "Flash sparsecrclist error" && exit /B 1
)
Click to expand...


Where is flash_all.bat :(

unlocked and followed the instructions but it shows "miui recovery 5.0" screen.
 
Quick update: I have managed to install the stable MIUI, I didn-t choose the weekly because I saw that some users have battery drain problem.


Now I¨m 100% sure that first time my mistake was to non setting up the phone for adding the MiAccount.


So, since now everything worked smooth, I suggest to add this hint in the Guide Installation, I˝m pretty sure that will help a lot of new users or old users that have forgot what¨s the right mode to flash in fastboot.
 
Hi I wonder how to switch from beta to stable on Mi 11 since we don't have TWRP to format data yet
 
You must log in or register to reply here.

Similar threads

S
mi 11 ultra, how to update from miui 14.0.7.0 (TKAEUXM) to hyper os.
Replies
9
Views
4K
Xiaomi Mi 11 / Pro / Ultra / Lite / 11TPro
sazearte
S
C
Bootloop after ROM update via TWRP - Need help with Xiaomi Mi 10 Ultra (CAS)
Replies
1
Views
589
Xiaomi Mi 10/Pro /10Lite/Ultra/10T/Pro/Lite/10S
bloopydooby6969
bloopydooby6969
gogocar62
How to Install Stock ROM.
Replies
0
Views
2K
Mi General
gogocar62
gogocar62
gogocar62
Fix Networks for GARNET
Replies
69
Views
18K
Mi General
gogocar62
gogocar62
cypher
how to install Magisk on Xiaomi 13 - fuxi
Replies
2
Views
8K
Xiaomi 13 / Pro / Lite / Ultra
cypher
cypher
Top Bottom
Back