[GUIDE] How to install Xiaomi.eu ROM for Xiaomi Mi 10T (apollo)

[szxa21]

Credits to ingbrzy and Xiaomi.eu team, Whyle (TWRP recovery).

You will need:
Fastboot binary https://androiddatahost.com/uq6us
Xiaomi.eu ROM Stable Sourceforge
Mi 10T (apollo) TWRP recovery Androidfilehost
Windows PC

Working:

• Boot
• Decryption data
• Vibration
• flash zip

Not working:

• ADB sideload

Note: Bootloader must be unlocked before you continue with the procedure below

1. Extract Minimal_ADB_Fastboot_v1.4.3.zip
2. Put ROM file and TWRP file on the same directory
3. Connect phone to PC and put phone into fastboot mode (reboot + pressing volume down button)
4. Open command prompt on fast boot folder
5. fastboot boot <twrp.img> press Enter (replace twrp.img filename as required)
6. Open File Explorer on PC and go to apollo or 10T drive
7. Copy over Xiaomi.eu ROM zip to root directory /
8. Select Install option in TWRP then select ROM file from root directory
9. Reboot TWRP to system
10. On MIUI default recovery, choose to Wipe Device
11. Lastly, Reboot phone and wait for MIUI to load properly

 

[stevenx]

yo thanks for the guide. does the TWRP and ADB can use for 10T Pro ?

 

[markus70]

Credits to ingbrzy and Xiaomi.eu team, Whyle (TWRP recovery).

You will need:
Fastboot binary https://androiddatahost.com/uq6us
Xiaomi.eu ROM Stable Sourceforge
Mi 10T (apollo) TWRP recovery Androidfilehost
Windows PC

Working:

• Boot
• Decryption data
• Vibration
• flash zip

Not working:

• ADB sideload

Note: Bootloader must be unlocked before you continue with the procedure below

1. Extract Minimal_ADB_Fastboot_v1.4.3.zip
2. Put ROM file and TWRP file on the same directory
3. Connect phone to PC and put phone into fastboot mode (reboot + pressing volume down button)
4. Open command prompt on fast boot folder
5. fastboot boot <twrp.img> press Enter (replace twrp.img filename as required)
6. Open File Explorer on PC and go to apollo or 10T drive
7. Copy over Xiaomi.eu ROM zip to root directory /
8. Select Install option in TWRP then select ROM file from root directory
9. Reboot TWRP to system
10. On MIUI default recovery, choose to Wipe Device
11. Lastly, Reboot phone and wait for MIUI to load properly

How to update from 06 to 07 - without erase user data?

 

[Mcign]

Thanks very much , i try and work perfect but is the only way to install weekly , don't works with twrp installed and rom from otg ?
Thanks again

 

[robertb_45]

How to update from 06 to 07 - without erase user data?

There's no way to avoid erasing data, it is mandatory.

 

[Daviedz]

Thanks very much , i try and work perfect but is the only way to install weekly , don't works with twrp installed and rom from otg ?
Thanks again

Just use the latest TWRP from whyle then flash/install
Then you can install weekly rom as per normal

Sent from my M2007J3SG using Tapatalk

 

[robertb_45]

Reading more carefully you should correct this step, from:

9. Reboot TWRP to system

to:
9. Reboot TWRP to recovery

 

[Poney70]

@robertb_45 I guess both ways are working because the phone should boot to stock recovery if it can't boot to system.

 

[robertb_45]

@Poney70 You're right, that's true

 

[Zefiris]

I have unlock the phone downloaded rom, adb, twrp. When I am in recovery twrp mode i cant access internal storage on phone and I cant copy and install rom on phone

 

[Poney70]

I have unlock the phone downloaded rom, adb, twrp. When I am in recovery twrp mode i cant access internal storage on phone and I cant copy and install rom on phone

1) Device name
2) TWRP version

 

[Zefiris]

Found out fault: I didn't wipe the data...succesfully installed eu stable rom 12.5 on my mi 10t
@Poney70 thank you for trying to help me.

 

[Dreanswan]

What version should i look for in sourceforge? And when should i flash magisk if i want root?

 

[Poney70]

What version should i look for in sourceforge?

Latest ROM released for your device, no?

 

[Dreanswan]

Latest ROM released for your device, no?

Yeah so like xiaomi.eu_multi_HMK30SUltra_MI10T_V12.5.1.0.RJDCNXM_v12-11.zip i guess? What hmk30sultra stands for?

 

[Poney70]

Yeah so like xiaomi.eu_multi_HMK30SUltra_MI10T_V12.5.1.0.RJDCNXM_v12-11.zip i guess? What hmk30sultra stands for?

If you have a Mi 10T or a Mi 10T Pro, yes. ^^

HMK30SUltra = Redmi K30S Ultra (device with "apollo" codename for the China market)

 

[Dreanswan]

If you have a Mi 10T or a Mi 10T Pro, yes. ^^

HMK30SUltra = Redmi K30S Ultra (device with "apollo" codename for the China market)

When should i flash magisk?

 

[Poney70]

When should i flash magisk?

I advise to flash Magisk after you finished the initial setup of your device.

After that, you can always flash Magisk directly after the installation of a ROM's update.

 

[Dreanswan]

I advise to flash Magisk after you finished the initial setup of your device.

After that, you can always flash Magisk directly after the installation of a ROM's update.

If i get this correctly i wont have twrp as recovery,i will just boot into it with adb right?

 

[Poney70]

If i get this correctly i wont have twrp as recovery,i will just boot into it with adb right?

You can (and should) flash a custom recovery like TWRP.

You need a custom recovery if you want to use the System Updater in Xiaomi.eu ROMs and install ROM updates.

 

[deedend]

You can (and should) flash a custom recovery like TWRP.

You need a custom recovery if you want to use the System Updater in Xiaomi.eu ROMs and install ROM updates.

Can I use this ROM without root? I suppose the bootloader needs to stay unlocked, right?

 

[Poney70]

Can I use this ROM without root? I suppose the bootloader needs to stay unlocked, right?

You can use this ROM without root.

Bootloader needs to stay unlocked, of course.

 

[Dreanswan]

You can (and should) flash a custom recovery like TWRP.

You need a custom recovery if you want to use the System Updater in Xiaomi.eu ROMs and install ROM updates.

10. On MIUI default recovery, choose to Wipe Device how can i boot in stock recovery if i flash twrp,or should i format data in twrp?

 

[Poney70]

10. On MIUI default recovery, choose to Wipe Device how can i boot in stock recovery if i flash twrp,or should i format data in twrp?

If you follow the steps, you don't flash TWRP but only boot TWRP via fastboot.

That's why you boot to stock recovery when you select Reboot -> Recovery in TWRP.

You don't need to format data in TWRP because this seems to not work correctly (on your device).

 

[Poney70]

So what do you mean by system updater? Is it like ota updates?

- It's like OTA updates, you get a notification when a new ROM update is available and you can download and start installation process (=boot to custom recovery and directly flash the ROM).

You said if i want to have that i need to flash recovery, but in tutorial it says only to boot in twrp not flash it.

- These steps are only for the first Xiaomi.eu installation on your device (or if you want to do a clean installation). After that, you can flash TWRP and use it, without issue.

I'm on 12.1.5 global.. can i till flash this rom?

Of course, follow the steps and it will okay.