[GUIDE][cas] How to install Xiaomi.eu ROM for Xiaomi MI10 Ultra
- Thread starter ingbrzy
- Start date
Poney70
Donator
- Oct 3, 2019
- 5,488
- 337
Hello,
Possible workaround:
Go in phone's settings => "Apps" => "Dual apps" => Click the settings icon in the top right corner -> "Delete dual apps' accounts"
Device will reboot and you can try to make dual apps again.
You are great....i do this step...and now works well thank you very muchHello,
Possible workaround:
Go in phone's settings => "Apps" => "Dual apps" => Click the settings icon in the top right corner -> "Delete dual apps' accounts"
Device will reboot and you can try to make dual apps again.
Nice welcome fella.
If need help demandes moi
An advice install volt magisk module to get volt and vowifi working on 10 ultra on french carriers. Stable rom are good enough with A11
Has anyone found a way to control volume of notifications, calls, ringtone, alarms separatelly. it's super annoying when I have set ringtone to max and my notifications is maxed as well but it's 5 times louder than my ringtone.....
katerpanne
Members
- Apr 19, 2014
- 3,557
- 332
Last edited:
Hi, It's my first time rooting & flashing a rom. I'm stuck in the TWRP recovery loop.
My configs
System: Mac ( I can get access to a PC/windows as well in case)
Used XiaomiTool v2 to unlock bootloader and install twrp
recovery used recovery-TWRP-3.4.2B-1208-XIAOMI10ULTRA-CN-wzsx150
rom used xiaomi.eu_multi_MI10Ultra_V12.5.1.0.RJJCNXM_v12-11 stable
Steps I did:
I have formated, wiped, installed the same ROM multiples times as I read on some threads it worked for people but nothing worked till now what I tried.
Stuck in the TWRP loop. What can I do to make the phone work?
Thanks
My configs
System: Mac ( I can get access to a PC/windows as well in case)
Used XiaomiTool v2 to unlock bootloader and install twrp
recovery used recovery-TWRP-3.4.2B-1208-XIAOMI10ULTRA-CN-wzsx150
rom used xiaomi.eu_multi_MI10Ultra_V12.5.1.0.RJJCNXM_v12-11 stable
Steps I did:
- unlocked the bootloader
- Downloaded TWRP from https://androidfilehost.com/?w=files&flid=318210&sort_by=date&sort_dir=DESC
- The tool asked to give an image file of the twrp so I provided the twrip img file which I downloaded from the above link
- downloaded stable xiaomi.eu_multi_MI10Ultra_V12.5.1.0.RJJCNXM_v12-11 from https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
- TWRP started and select language English installed the rom from OTB external storage. installation is done and device restarted but since then it's in recovery boot loop
- initially, it was giving an error for /data mount invalid and the internal device wasn't being shown. I reformated the /data partition from advanced wipe to fat and then again to ext4.
- formatted /data /cache and installed the room again but to no avail.
I have formated, wiped, installed the same ROM multiples times as I read on some threads it worked for people but nothing worked till now what I tried.
Stuck in the TWRP loop. What can I do to make the phone work?
Thanks
LOLO9393
Members
- Feb 8, 2016
- 3,228
- 322
I don't own this tricky phone.
Issue are reported here and there on the weekly topic.
I have seen it was said to make use of 3.5.. TWRP version (Android 10 version).
But I didn't follow all the past story.
Sorry.
Did you format data in TWRP before installing the zip rom?.
nope, I didn't format data. That's why I assume it gave me the mount invalid error but I formated later in the TWRP and that error was gone as mentioned in my comment but still stuck.
I own and have just last week reflashed my Mi10 Ultra. Can I summarise the issues I had as follows:
1. When TWRP boots it needs to decrypt the memory for this you need to remove all security and use a pattern, then TWRP asks you for the pattern and decrypts.
2. Use a USB stick and OTG the ROM, because you shouldn't load the TWRP onto your phone, just use it to load a ROM, you need to run it as follows:
from PC -> "fastboot boot recovery-TWRP-3.4.2B-1208-XIAOMI10-CN-wzsx150.img" or whatever your TWRP file is called
and wait while starting, then you can flash what you want.
3. TWRP you erase as required. I did not format anything! Once you have TWRP running on the phone plug in the USB mount it and flash the rom. It takes forever to boot and looks like its stuck on MIU logo for 10 minutes (no joke!).
My notes say I followed https://androidfilehost.com/?fid=2188818919693748129 (the file has some bat files and the TRWP image in it)
When I first flashed the device I did not get the decypt working and had to flash from pc, which is tricky and I would not be confident I could tell you how I did it!
Good luck
1. When TWRP boots it needs to decrypt the memory for this you need to remove all security and use a pattern, then TWRP asks you for the pattern and decrypts.
2. Use a USB stick and OTG the ROM, because you shouldn't load the TWRP onto your phone, just use it to load a ROM, you need to run it as follows:
from PC -> "fastboot boot recovery-TWRP-3.4.2B-1208-XIAOMI10-CN-wzsx150.img" or whatever your TWRP file is called
and wait while starting, then you can flash what you want.
3. TWRP you erase as required. I did not format anything! Once you have TWRP running on the phone plug in the USB mount it and flash the rom. It takes forever to boot and looks like its stuck on MIU logo for 10 minutes (no joke!).
My notes say I followed https://androidfilehost.com/?fid=2188818919693748129 (the file has some bat files and the TRWP image in it)
When I first flashed the device I did not get the decypt working and had to flash from pc, which is tricky and I would not be confident I could tell you how I did it!
Good luck
Last edited:
Poney70
Donator
- Oct 3, 2019
- 5,488
- 337
Hello,
Wallet icon (it's a briefcase icon) = Work profile is enabled.
Orange battery icon = Power saver is enabled.
But those questions are off-topic here. ^^
Last edited:
I recently flashed the stable rom(12.5.1) on my phone(mi 10 ultra). but just after a few days the OS/software has been lagging a lot and kinda jittering. The phone feels laggy doing any/many actions.
The screen appears to be blurry for second(s) and then becomes clear. e.g unlock phone, or swiping down from top right to see the menu(it takes 2-3 seconds for the menu to appear) before it was super fast less than a second. and no lag whatsoever was felt.
Is it a known issue of the stable rom or is it just me? and if so what solutions are available?
customiuizer wants some framemwork to be installed in order for the mods to work.... For Butler app.... I found over 200 apps with the name butler so I can't confirm that if works
tarkan37
Members
- Feb 24, 2016
- 308
- 52
sergiobodyweb.
Members
- Mar 15, 2021
- 62
- 20
Curious,
in my normal Update screen, the one its' not working when asking for an update (Weekly 21.3.17 installed), I see the three dots in the top right corner, it says "Chose update package", can I select another Weekly downloaded update from there? I bet no, it would be too easy, LOL
in my normal Update screen, the one its' not working when asking for an update (Weekly 21.3.17 installed), I see the three dots in the top right corner, it says "Chose update package", can I select another Weekly downloaded update from there? I bet no, it would be too easy, LOL
Poney70
Donator
- Oct 3, 2019
- 5,488
- 337
You lose your bet, you can do that without issue on your Mi 10 Ultra.
sergiobodyweb.
Members
- Mar 15, 2021
- 62
- 20
Wow. So why it has never been mentioned this method?You lose your bet, you can do that without issue on your Mi 10 Ultra.
sergiobodyweb.
Members
- Mar 15, 2021
- 62
- 20
Sorry, I just would like to be 101 sure to attempt this thing from the Update screen.
Anyway I still have installed TWRP, so I could install the image with that too.
Anyway I still have installed TWRP, so I could install the image with that too.
sergiobodyweb.
Members
- Mar 15, 2021
- 62
- 20
Similar threads
- Sticky
