Yes, I can confirm. GPay works fine.Ok, I'm trying to flash the TWRP and the weekly release after.
Zencooler, do you confirm that the last weekly update on TWRP can work with Google Pay?
So, I installed twrp.img (supposedly), but I'm not able to reboot in in recovery mode, not even by pressing the "up volume button + off", it always go back to Fastoboot or load the old ROM.
This the message on the console :
C:\Users\sergi\Desktop\TWRP Fastboot>fastboot flash recovery twrp.img
Sending 'recovery' (131072 KB) OKAY [ 2.905s]
Writing 'recovery' OKAY [ 0.346s]
Finished. Total time: 3.295s
C:\Users\sergi\Desktop\TWRP Fastboot>fastboot boot twrp.img
Sending 'boot.img' (131072 KB) OKAY [ 2.882s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
The first time the boot twrp.imag command worked, but the cellphone wasn't rebooting
I tried several times to flash the twrp.img image, and that goaes fine, then the boot in recovery mode is impossible.
Hello. like what? what is so bad about beta? why should I go back to Android 10?Don't use the beta, it's terrible, the stable EU ROM is bad enough since Android 11. I had to go back to the android 10 version because nothing worked right.
I downloaded the guide but wich trwp I have to choose from the linkThe version you flashed was before twrp had been found and is from September 2020. There has been many stable and weekly branch versions since but you need to install twrp first.
I cannot remember what branch the fastboot version was based on but as it is so old, it would be best to format anyway if you want to change branches to weekly or stable. But once you choose a branch, weekly ( nearly every week but may have small bugs) or stable (only updated now and again but more stable) you must stay on that branch. If you do, each update only requires a simple cache and dalvik wipe, no loss of data. If you decide to switch branches, then you must format your data due to possible partition differences between them. If you don't, you may get caught in a boot loop until you do.
So your next step is to replace your stock recovery with twrp using the phone in fastboot and connected to a pc. Once done, you can do all your updates from your phone using the twrp recovery. Just download your new branch version and install but as I said, as you are so far behind, might be worth formatting and restore your data after.
If you want some help and information on how to do this please download my guide from my mega page here, https://mega.nz/file/fIoWUD4a#q1S3wYoOltgaPcchAiXc3dHal7Sf31k5BZQBM4xy6NE
Or of course, come back here and ask away. Everyone here are here to help.
The one that says 10 pro works just fine with pin.There are only 2, both work the same, one says 10 pro, the other 10 ultra. Neither one works with pin or password, you need to set pattern currently. Or download the one on this forums ROM download page or via my link or http://mifirm.net
Anyone tried it yet?New one for us, stable 12.5.1.0 available !!
Yes, unlock bootloader, and flash when it's available.Thanks. I'm gonna stick with my original plan and go for the M10 ultra. Like you say it has months of dev behind it and will be a while before EU ROM becomes available and stable. Intune support is a key thing for me.
If you go for the M11 ultra will you be able to flash the international ROM as the phone is being released globally?
Hey mark, I've read your latest comments and it seems like you know quite a lot about miui and mi phones in generalThe version of GMS put on mine wouldn't run Intune. You need a full version put on and that only come with the EU ROM. The ultra is a far better phone with full EU ROMs available now. It has a 120w charger, full charge in 20 mins or so. Super camera and a year's worth of support behind it. But the 11 Pro has band 20 apparently but that only matters if you use O2 based networks, where the 10 ultra hasn't.
Yes, i have install the new rom, it looks ok for the moment !!Anyone tried it yet?
My newbie self may hold off for the moment as only have the notification order bug and full screen gestures issues on current version for me which i've learnt to live with, but cannot risk upgrading and losing google pay/safetynet/banking apps/fingerprint support.
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation