Hello. I'm pretty new to flashing and even forum stuffs. But idk if I missed it. But is OTA update still not possible? Also do I have to update the rom every week?
[GUIDE][alioth] How to install Xiaomi.eu ROM for Xiaomi Redmi K40
- Thread starter ingbrzy
- Start date
Frederik VDP
Members
- Aug 10, 2013
- 124
- 40
OTA is possible, but you will reboot into recovery when you press install.
If you are on the weekly rom, a new build will be provided every thursday, you don't have to install it. But if you aren't planning on installing weekly builds, I suggest you just install the stable roms.
My POCO F3 6GB/128GB was stuck in the POCO logo following this guide, the guide itself is safe and correct the only issue is with downloaded ROM (the weekly version)
I downloaded ---> xiaomi.eu_multi_HMK40_POCOF3_V12.5.2.0.RKHCNXM_v12-11-fastboot
Reapplied the same steps and it went from the POCO logo in boot to the MIUI logo in less than a minute, in 10 min or so it fully booted up so if you run into the same issue the fix is available.
I downloaded ---> xiaomi.eu_multi_HMK40_POCOF3_V12.5.2.0.RKHCNXM_v12-11-fastboot
Reapplied the same steps and it went from the POCO logo in boot to the MIUI logo in less than a minute, in 10 min or so it fully booted up so if you run into the same issue the fix is available.
likwix
Members
- Apr 11, 2021
- 5
- 13
Hello everyone,
I'm currently using MIUI 12.5.2.0 (stable version) on my alioth.
If I want to update the system through the "update functionnality", here is what happen after downloading it:
But if I click on "Yes", nothing happen.
So I checked on the previous post here and I'm still a bit confused.
If I want to update, I'm supposed to :
1) download "TWRP-3.5.1-alioth-Nebrassy-2" version of TWRP
2) boot it (and not install it), running
3) manually select the ROM already downloaded by the system update and run the installation
BUT...
... I don't want to lose my data (or get some loop issues obviously) and some posts mentions we have to wipe data...
So in this case (upgrading from 12.5.2.0 to 12.5.3.0) is the wiping step necessary?
I prefer to ask before doing something wrong...
I'm currently using MIUI 12.5.2.0 (stable version) on my alioth.
If I want to update the system through the "update functionnality", here is what happen after downloading it:
But if I click on "Yes", nothing happen.
So I checked on the previous post here and I'm still a bit confused.
If I want to update, I'm supposed to :
1) download "TWRP-3.5.1-alioth-Nebrassy-2" version of TWRP
2) boot it (and not install it), running
fastboot boot twrp.img3) manually select the ROM already downloaded by the system update and run the installation
BUT...
... I don't want to lose my data (or get some loop issues obviously) and some posts mentions we have to wipe data...
So in this case (upgrading from 12.5.2.0 to 12.5.3.0) is the wiping step necessary?
I prefer to ask before doing something wrong...
Not necessary to wipe data when updated from stable to stable rom
From poco f3 via Tapatalk
I am the newbie of flashing rom, I watch the video at #1 and didn't found any steps are related to TWRP.
So my question is that the video of #1 is it not work anymore?
I am waiting to unlock my K40 BL and will flashing it in there days so I want to learn more about that. Thanks!
So my question is that the video of #1 is it not work anymore?
I am waiting to unlock my K40 BL and will flashing it in there days so I want to learn more about that. Thanks!
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,959
- 322
How to install Xiaomi.eu ROM for Redmi K40 / Poco F3 using TWRP
Installation instructions xiaomi.eu for Redmi K40 / Poco F3
- Download ROM
WEEKLY - https://www.androidfilehost.com/?w=files&flid=326186
STABLE - https://androidfilehost.com/?w=files&flid=321331
- Insert the downloaded ROM into the phone's storage
- restart to fastboot and connect to PC
- Run TWRP via Fastboot toolkit
https://mega.nz/file/Ddg0iCzQ#GRdm-RMMxah-QGa4priEJJzLzihTbklLjed3XIZh8G4
Unzip the downloaded toolkit, run it by clicking on RUN_TWRP.bat
- Install rom
card / Install
find the required ROM in the storage
and start the installation Swipe to confirm flash
after the installation is complete, select the house navigation key
- Perform Format Data
card / Wipe
Format Data
Type yes to confirm the format
when formatting is complete, the phone restarts the system
- Done
wait for the system to start, the first boot may take longer.
- Download ROM
WEEKLY - https://www.androidfilehost.com/?w=files&flid=326186
STABLE - https://androidfilehost.com/?w=files&flid=321331
- Insert the downloaded ROM into the phone's storage
- restart to fastboot and connect to PC
- Run TWRP via Fastboot toolkit
https://mega.nz/file/Ddg0iCzQ#GRdm-RMMxah-QGa4priEJJzLzihTbklLjed3XIZh8G4
Unzip the downloaded toolkit, run it by clicking on RUN_TWRP.bat
- Install rom
card / Install
find the required ROM in the storage
and start the installation Swipe to confirm flash
after the installation is complete, select the house navigation key
- Perform Format Data
card / Wipe
Format Data
Type yes to confirm the format
when formatting is complete, the phone restarts the system
- Done
wait for the system to start, the first boot may take longer.
Last edited:
Hi
I'm completely new to installing customs roms, and I'm trying to get the stable Xiaomi.Eu for my Poco F3 but I'm reading a dozen different guides and steps and I'm super confused, so if anyone could give me a clear step by step for the stable version boot I would much appreciate it!
The steps I've done so far:
I have unlocked the bootloader, but I did sign back in to the phone and check the unlock status, and I activated USB debugging since it was off again for some reason.
I have downloaded the ADB drivers, platform tools and TWRP.img (do I need to rename the img file, some post said so at least?)
And that's where I am now. So do I have to wipe the phone again and enter fastboot right after since I signed in after unlocking? And what do I do from there?
I'm also seeing 2 versions of the stable rom:
xiaomi.eu_multi_HMK40_POCOF3_V12.5.2.0.RKHCNXM_v12-11-fastboot.zip
and
xiaomi.eu_multi_HMK40_POCOF3_V12.5.3.0.RKHCNXM_v12-11.zip
which one do I need?
I'm completely new to installing customs roms, and I'm trying to get the stable Xiaomi.Eu for my Poco F3 but I'm reading a dozen different guides and steps and I'm super confused, so if anyone could give me a clear step by step for the stable version boot I would much appreciate it!
The steps I've done so far:
I have unlocked the bootloader, but I did sign back in to the phone and check the unlock status, and I activated USB debugging since it was off again for some reason.
I have downloaded the ADB drivers, platform tools and TWRP.img (do I need to rename the img file, some post said so at least?)
And that's where I am now. So do I have to wipe the phone again and enter fastboot right after since I signed in after unlocking? And what do I do from there?
I'm also seeing 2 versions of the stable rom:
xiaomi.eu_multi_HMK40_POCOF3_V12.5.2.0.RKHCNXM_v12-11-fastboot.zip
and
xiaomi.eu_multi_HMK40_POCOF3_V12.5.3.0.RKHCNXM_v12-11.zip
which one do I need?
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,959
- 322
There is a detailed guide above you. You don't have to do anything just follow the instructions exactly.
You need xiaomi.eu_multi_HMK40_POCOF3_V12.5.3.0.RKHCNXM_v12-11.zip,
On the first page is an old installation method that is not used.
You need xiaomi.eu_multi_HMK40_POCOF3_V12.5.3.0.RKHCNXM_v12-11.zip,
On the first page is an old installation method that is not used.
Last edited:
Thank you!
I don't need to be in fastboot mode for this method then? Because in fastboot I can't see my phone storage on PC so I can't put the rom there. Also do I just put the rom zip into the first folder of storage?
Also I don't need to have TWRP in my phone storage?
Installation:
1. fastboot boot twrp.img
2. copy that same twrp image to the device
3. go to Advanced > Install Recovery Ramdisk
4. select the image you copied
these steps?
Last edited:
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,959
- 322
OMG It's so simple. Follow step by step
Have you read the instructions?
first insert rom into the phone, then boot fastboot.
do not mix different instructions
Have you read the instructions?
first insert rom into the phone, then boot fastboot.
do not mix different instructions
Last edited:
Like I said, I've never done this before so I wanna be sure I do stuff correctly. And I did read the instructions, you just edited it to have the set to fastboot after putting the rom into storage.
I'm just curious why there are different instructions in the first place. So just to make it clear, I don't need to have TWRP folder or TWRP.img in my phone storage? Your guide doesn't mention it but you do have a TWRP folder in the storage image.
Yes I understand, but I'm specifically talking about the instructions on the TWRP site that mention about the recovery ramdisk and putting the twrp.img into your phone storage. Don't you need twrp to get automatic updates for the rom? I'm sorry if I sound dumb or repeating but I'm a literal baby when it comes to this stuff.
Alright sorry to trouble you then. I know you said it's not necessary to have TWRP, but I was trying to clarify if it was beneficial, or if your steps do it automatically at some point.
I just want to be able to get the automatic updates on future stable versions and not have to wipe memory / do everything manually again.
I just want to be able to get the automatic updates on future stable versions and not have to wipe memory / do everything manually again.
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,959
- 322
Everything will be done in my instructions.
When done, you will have TWRP and receive updates (no further erasing of memory)
When done, you will have TWRP and receive updates (no further erasing of memory)
Thanks, it is a clear tutorial to explain how to install the ROM and TWRP. I will follow to do when my BL is unlocked.
Additionally, Cloud you briefly to explain how to do the ROM update and TWRP update? Many thanks for your help
If TWRP is release new update is it necessary to update it? Does it difficult?
beicuxhaven
Members
- Dec 23, 2019
- 23
- 15
Is it only me that can't find the "Pocket Mode" ? on my POCO X3 I can find it under the "Lock screen" option but nothing on my POCO F3
Can I use this method to install EU ROM (weekly) for my k40 (Chinese version rom)
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
Why not?
This is the method we all used here.
That's a good idea the OP made a perfect summary.
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,959
- 322
If you have an unlocked bootloader then yes
Similar threads
