[GUIDE] A Beginner's Guide to Flashing Xiaomi.EU Stable on Mi 10T/Mi 10T Pro/Redmi K30S Ultra (thorough & step-by-step)


Andi17 said:
adb: error: failed to get feature set: no devices/emulators found

I get this error
Click to expand...
What do you get with "adb --version" command?

You can also download the latest adb version via the link given in my guide (if you are on Windows). :)
 
Last edited:
Poney70 said:
Did you reboot to Recovery? What do you get with "adb --version" command?

You can also download the latest adb version via the link given in my guide (if you are on Windows). :)
Click to expand...
Now it worked, but incalid file format :(
 
Poney70 said:
ROM zip is corrupted or the transfer between your computer and your phone wasn't 100% completed. ^^
Click to expand...
After the ROM installation is completet the system startet only in recovery? (Bootloop)
 
Last edited:
Andi17 said:
After the ROM installation is completet the system startet only in recovery? (Bootloop)
Click to expand...
These steps are important:

1.9.6) Tap back on TWRP. Go to Reboot > Reboot to recovery.
Since we just "fastboot boot" the TWRP and not "fastboot flash", the TWRP was only temporary and now you're back in stock recovery.
1.9.7) This step is important. In stock recovery, > Wipe data. (Your phone won't boot without this step).
1.9.8) After wiping, > Reboot.
1.9.9) Congrats! It should take about 5-10 minutes on first boot. Don't freak out. It will work :)

;)
 
  • Like
Reactions: Andi17
I flashed the recovery and don´t boot from it ;)
Any idear about the bootloop? :(
 
Last edited:
You have to boot stock recovery image and use "Wipe Data" option, you can find recovery.img in any Official "fastboot" ROMs.

What was your Official ROM version (Global or EEA)?
 
Last edited:
Ask for support and help from all who are there
I have a Mi 10 Ultra where the bootloader was opened and the recovery was installed No. TWRP - 3 .4 .2 b - 1208 150 b y w z s x 150 and all kinds of scans were done and the latest version of European ROM No. 12 was installed. 5 . 6 The stable, but some things were entered into the recovery and some of the internal files were deleted through Advanced, as they cannot be remembered now because I want to delete everything related to the old ROM and the device was rebooted, but I was surprised that the device is not recognized by the system and that By writing that the device is not supported 2 / I lost the feature to open with the finger 3 / Unbearable heat and heat 4 / The battery charge quickly expires 5 / The system hangs and freezes, which hurt that restarting the device from the beginning 6 / Some banking programs do not work, especially NFC payment 7 / I was tired in my matter and did not find, after God, other than you to ask for help, knowing that I resorted to using the miflash tool to restore the old system and activate all the features, but my attempts were unsuccessful.
Where I express my thanks and respect to those who will contribute to saving me
 
vret123 said:
I know there are already quite a few guides about this but I wanted to make one that is more thorough and easier to follow.
This guide applies to:
-Mi 10T
-Mi 10T Pro
-Redmi K30S Ultra

Here are the resources needed:
-Aforementioned device
-Computer (desktop/laptop)
-USB cable
-Flash drive that can connect via USB-C (recommended but not necessary)
-SIM linked to Mi Account that has sufficient balance for mobile data
-TWRP for device (linked in the guide)
-Xiaomi.EU Stable for device (linked in the guide) [NOTE: at the time of writing the latest for our devices is v12.5.1.0]
-Patience (if you haven't unlocked your bootloader before, you have to wait at least 1 week)

Just in case anybody asks, yes the ROM for the Redmi K30S Ultra works on BOTH the Mi 10T and Mi 10T Pro. The zips for the Mi 10T Pro are old because the developers unified the ones for the Redmi K30S Ultra to work for both phones.

I'm running Stable on my Mi 10T Pro and everything works just fine.
It's way faster, cleaner, snappier than Global and for some reason has more features. If this came preinstalled on all Xiaomi phones then they would be even more appealing (but I know Xiaomi wouldn't do that because they make more money off of ads). I have NOT experienced any bugs, SafetyNet passes, banking apps work, Google Play is certified, Netflix is Widevine L1. There's a 108mp mode in the camera app so there's nothing really wrong with it.
Very satisfied with it and I'm not planning to go back on stock Global anytime soon

1.) The first step is unlocking your bootloader (If you have already unlocked your bootloader, proceed to step 1.6).
1.1) Remember your Xiaomi/Mi Account password. I recommend writing it down.
1.2) This process requires you to have mobile data. Turn on mobile data. It is expected that your Mi Account is already logged in your phone.
1.2.1) Go to your phone's settings > Mi Account > Devices > your phone > TURN ON "Find device".
1.2.2) Go to your phone's settings > Mi Account > Xiaomi Cloud (turn it on if you haven't yet) > Sync.
1.2.3) Go to your phone's settings > About phone > TAP ON "MIUI Version" multiple times until the message appears "Your are now a developer!".
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
1.2.4) Go to your phone's settings > Additional settings > Developer options > ENABLE "OEM Unlocking".
1.2.5) > ENABLE "USB debugging".
1.2.6) > ENABLE "USB debugging (Security settings)".
1.2.7) > Mi Unlock Status > (make sure your mobile data is still on) Tap on "Add account and device".
There should be a message that says "Added successfully. Mi Account is associated with this device now". If an error message appears, tap on "Add account and device" again. You must have sufficient balance for your mobile data to actually connect you to the internet.
1.3) Download minimal ADB on your computer. Here's the link: https://androiddatahost.com/wp-content/uploads/Minimal_ADB_Fastboot_v1.4.3.zip
1.3.1) Open the zip and drag out the .exe inside. Install it (to make it easier, check the "Create a desktop icon" checkbox).
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
1.3.2) Click on the desktop icon to run it. Connect your phone to your computer.
1.3.3) Type "adb devices" on the minimal adb console window and press enter. A message should appear on your phone asking for authorization. Allow it. Type "adb devices" on the console again and check if your phone is authorized.
1.3.4) Unplug your phone from your computer. Download Xiaomi's unlock tool here:
> https://en.miui.com/unlock/download_en.html
1.3.5) Extract all contents from a zip. You can make a new folder anywhere in your computer and put the contents there.
1.3.6) Run "batch_unlock.exe". When it opens, log in your Xiaomi account. It should ask you for a code sent to the sim you used mobile data on earlier.
1.3.7) Once you're now logged in, turn off your phone. Hold down the VOLUME DOWN button and POWER button. Release until "Fastboot" appears on your phone.
1.3.8) Connect your phone to your computer again. In the Unlock Tool, click "Refresh". Once your phone appears, click on it, then click "Unlock".
1.3.9) If this is the first time you're doing this, don't worry your data won't be wiped just yet. It will tell you to wait 160+ hours before you can unlock your bootloader. This is normal.
1.4) You have to wait 1 week before you can unlock your bootloader. In the meantime, DON'T remove your Mi Account from your phone and DON'T add another Mi Account. Also DON'T change your sim. You can use your device normally. Don't reset it and just wait for at least 1 week.
1.5) After 1 week has passed, unlock your bootloader using the Unlock Tool (note you have to put your phone under fastboot mode again before connecting it to your computer). Your data will be wiped so back up your data before proceeding.
1.6) Once you're done unlocking your bootloader, let your phone boot, there will be a message asking you to activate your device. Go to "Open Wifi settings" > connect to your WiFi. Then Tap on "Activate this device". You'll be asked to login your Xiaomi/Mi Account. Once done, shut down your device.
1.7) Download these necessary files for your device:
TWRP custom recovery (this one by geoanto555 is currently the best one for our device)
> https://androidfilehost.com/?fid=2188818919693766094
Xiaomi.EU Stable v12.5.1.0 (I think the next version is coming in a few weeks. Stable gives about 1 update per month)
> https://sourceforge.net/projects/xi...a_MI10T_V12.5.1.0.RJDCNXM_v12-11.zip/download
1.7.1) For convenience, rename your downloaded TWRP to "apolloTWRP".
1.7.2) For the ROM, it's more convenient to put it in a flash drive that you can connect to your phone using a USB-C adapter. If you don't have one, proceed to step 1.8.
1.8) Put your device into fastboot mode (Volume down + Power). Connect to computer.
1.9) Open minimal adb in your computer.
Type "fastboot devices" and enter. Check if your phone is listed.
1.9.1) Type and enter "fastboot boot apolloTWRP.img" (we're only doing fastboot boot, not fastboot flash because the current TWRP is not yet perfect to be flashed permanently).
1.9.2) Your phone will now boot into TWRP. Once this happens, go to Wipe > Format data > type on yes to confirm.
Once that's done, go to Reboot > Reboot to bootloader. You should be back in Fastboot mode.
1.9.3) In the minimal adb, type and enter "fastboot boot apolloTWRP.img" again. Once your phone is back in TWRP, plug in your flash drive. If it doesn't show up, go to Mount > and select it. If you don't have a flash drive, connect your phone to your computer. Your phone should show up in the File Explorer. Drag the ROM zip file to it (or you can just copy-paste).
1.9.4) If you're using a flash drive go to Install > select your flash drive > Tap on the zip file. The installation should now proceed.
If you copied it via cable, go to Install > your phone's Internal storage > Tap on the zip file.
1.9.5) Once it's done flashing, DON'T reboot it just yet. Go to Wipe > make sure to just check ONLY "Dalvik cache" and "cache".
1.9.6) Tap back on TWRP. Go to Reboot > Reboot to recovery.
Since we just "fastboot boot" the TWRP and not "fastboot flash", the TWRP was only temporary and now you're back in stock recovery.
1.9.7) This step is important. In stock recovery, > Wipe data. (Your phone won't boot without this step).
1.9.8) After wiping, > Reboot.
1.9.9) Congrats! It should take about 5-10 minutes on first boot. Don't freak out. It will work :)

2.) Regarding updates:
Xiaomi.EU Stable will get OTA updates using the built-in Updater just like in stock. If there is an update and you download it, it'll be in Internal storage > MIUI > download_rom (this may change so just explore where the downloaded ROM is located).
You will be able to Download the updates via OTA but you CAN'T directly install them since our TWRP is only temporary.
So for every update, you'd have to go to fastboot mode, "fastboot boot apolloTWRP.img", go to TWRP, and Install > the new update. A bit tedious but it's not all that bad considering Stable more or less only gets 1 update per month.
Since you already have Xiaomi.EU Stable installed at this point, you don't need to wipe anything. After flashing the update, DON'T wipe. Just reboot. But if you switch from Weekly to Stable or from Stable to Weekly, you'd have to do ALL the wiping steps again in step 1.9.

When looking for the zip for our device (Redmi K30S Ultra/Mi 10T/Mi 10T Pro), just use the find feature in your browser and search for HMK30SUltra_MI10T in the list.

3.) Polishes for a snappier and even cleaner experience
Xiaomi.EU Stable is already pretty clean but it's not perfect yet. To make it even cleaner, refer to my post here:

I hope these all helped :)
Click to expand...
Firstly thanks for this detailed instruction,
But i only faced one problem with TWRP, format data isn't working and encryption issues always show up i tried many versions and all of them the same, I even tried with orange fox (unofficial) and pitch black recovery (official), do you know how to get over this encryption issues.
 
Zeko Ronaldo said:
Firstly thanks for this detailed instruction,
But i only faced one problem with TWRP, format data isn't working and encryption issues always show up i tried many versions and all of them the same, I even tried with orange fox (unofficial) and pitch black recovery (official), do you know how to get over this encryption issues.
Click to expand...
Did you a factory Reset in the recovery to delete the encryption?
 
اخوانيBrothers, I did not find any answer to my question, as I relied on God. Then I hope to help me in the steps of the solution to end my suffering.
 
Hello,

Just red the guide here and have a few question.
I'm currently running 12.5.1 version, rooted and unlocked. But when trying to apply the update directly, it shows TWRP bootup screen and nothing appears. So, I've to cancel the update.

So tell me If what i want to do will work :

1. Flash a new twrp image (twrp-3.5.1.A10-apollo-geoanto555.img)
2. boot to recovery
3. Wipe dalvik and cache
4. Install 12.5.7 update (the 3.1 Go file ?)
5 .Wipe again (dalvik and cache)
6. Reboot

That's all ?

Thanks in advance
 
Ja567 said:
Hello,

Just red the guide here and have a few question.
I'm currently running 12.5.1 version, rooted and unlocked. But when trying to apply the update directly, it shows TWRP bootup screen and nothing appears. So, I've to cancel the update.

So tell me If what i want to do will work :

1. Flash a new twrp image (twrp-3.5.1.A10-apollo-geoanto555.img)
2. boot to recovery
3. Wipe dalvik and cache
4. Install 12.5.7 update (the 3.1 Go file ?)
5 .Wipe again (dalvik and cache)
6. Reboot

That's all ?

Thanks in advance
Click to expand...
Hello,

Your steps should work, yes. ;)

But you really don't need to wipe dalvik & cache twice... ^^

Only wipe dalvik & cache after ROM installation then reboot. :)
 
  • Like
Reactions: Ja567
You must log in or register to reply here.

Similar threads

J
Lockt MI account redmi note 12 pro 5g
Replies
0
Views
1K
Questions & Answers
jaapie
J
gogocar62
Unlock_hyperOS_ Global devices
Replies
87
Views
26K
Mi General
abshah847
A
senerex
[All-in-One] Xiaomi 14 (houji): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Replies
132
Views
57K
Xiaomi 14 / Pro / Ultra
daddy32
D
F
Impossible unlock bootloader again
Replies
1
Views
3K
Xiaomi Mi 10/Pro /10Lite/Ultra/10T/Pro/Lite/10S
inasense
I
Vakos
Invalid Xiaomi Mi 11 Ultra - crashing system apps / "dead alive phone"
Replies
15
Views
4K
Bugs
MrKuzminsky
M
Top Bottom
Back