[CM11/12][ROM + KERNEL][Linaro][EXT4][F2FS][UV][Intelliplug][AndMore] Khaon's kitchen 13/01
- Thread starter Khaon
- Start date
I tryed one more time now it saved but it is direct set back to 1728000
For now i am back on cm11 with your old kernel i will wait until Micha finished his work on cm12
Your issues happens only on cm 12 right?
I just seen that powerhal driver is built. Could be one or the culprit
X4nfire
Members
- 28 Jun 2014
- 204
- 52
It happens with both cm11 and cm12 but only with the the 13.12 kernel. With your kernel from 9.11 I can change max cpu with stock editor.
i just go back to cm11 because my mic does not work.
CM12 update
I tried to re-build with CAF latest sound librairies hoping it might fix the issue with the mic but no
.
Well, I think I read some ppl haven't this issue??? I have just uplodaed a new build(19/12/2014à.
Changelog:
Rom:
Kernel:
I tried to re-build with CAF latest sound librairies hoping it might fix the issue with the mic but no
.Well, I think I read some ppl haven't this issue??? I have just uplodaed a new build(19/12/2014à.
Changelog:
Rom:
Doesn't include my kernel !- nightly of the 19th december
- build:clang:try Ofast flag in replacement of O3, might cause instability! Report if weird behaviour
- powerHAL: make sure it doesn't overrides user's max freq when turning on the screen.
- powerHAL: break early if current governor is not ondemand or interactive on screen interaction
[/Color]
Kernel:
- cpufreq:fixed min/max frequencies and governor not restored with hotplugging
- ext4 updated to 3.4.105
- various 3.4.105 and upstream linux patches applied
- fs:f2fs: sync with upstream linux 3.4 branch
- lz4 updated to linux kernel upstream
- few patches to enhance the kernel
- Switch to AnyKernel2 solution: dump the current ramdisk and patch the fstab accordingly to your partition's file system
- Added post-init script tweaking io,mm,sched,...
Last edited:
XperianPro
Members
- 26 Oct 2013
- 648
- 82
CM12 update
I tried to re-build with CAF latest sound librairies hoping it might fix the issue with the mic but no
Well, I think I read some ppl haven't this issue??? I have just uplodaed a new build(19/12/2014à.
Changelog:
Rom:
- nightly of the 19th december
- build:clang:try Ofast flag in replacement of O3, might cause instability! Report if weird behaviour
- powerHAL: make sure it doesn't overrides user's max freq when turning on the screen.
- powerHAL: break early if current governor is not ondemand or interactive on screen interaction
Kernel:
Zip Package
- cpufreq:fixed min/max frequencies and governor not restored with hotplugging
- ext4 updated to 3.4.105
- various 3.4.105 and upstream linux patches applied
- fs:f2fs: sync with upstream linux 3.4 branch
- lz4 updated to linux kernel upstream
- few patches to enhance the kernel
- Switch to AnyKernel2 solution: dump the current ramdisk and patch the fstab accordingly to your partition's file system
- Added post-init script tweaking io,mm,sched,...
Did you add voltage control?
Alecsandru
Members
- 9 May 2014
- 251
- 60
The lollipop kernel has the same features than kitkat's one.
My twrp 2.8.2.0 supports f2fs yes. BUT do not support dual boot features.
However 2.7.0.0 does.
Both are mounting internal storage correctly.
--------------------------------------
CM11 update !
Kernel
- switched t anykernel solution: should make this kernel universal on all CM's based ROM
- One kernel for non and TDB devices(well it should, tdb users reports plz )
- corrected frequencies issues due to hotplugging
- updated with last patches of my lollipop branch(see last changelog above)
XperianPro
Members
- 26 Oct 2013
- 648
- 82
The lollipop kernel has the same features than kitkat's one.
My twrp 2.8.2.0 supports f2fs yes. BUT do not support dual boot features.
However 2.7.0.0 does.
Both are mounting internal storage correctly.
--------------------------------------
CM11 update !
Kernel
- switched t anykernel solution: should make this kernel universal on all CM's based ROM
- One kernel for non and TDB devices(well it should, tdb users reports plz
- corrected frequencies issues due to hotplugging
- updated with last patches of my lollipop branch(see last changelog above)
Believe me if Lollipop kernel had the same features I wouldnt ask then.
MH I tried the last lollipop kernel and it has voltage control but i don.t try the newest.
Did you flash the kernel on top of khaon Rom? Because it seams to be not included
voltage control is implemented, what app are you using? Probably the one you are using doesnt look at the correct sysfs entry
XperianPro
Members
- 26 Oct 2013
- 648
- 82
The vdd_table is located at /sys/device/system/cpu/cpufreq/vdd_table
Trickstermod 2.13.946 works fine here. Using aero control alsi for everything but the UV
Trickstermod 2.13.946 works fine here. Using aero control alsi for everything but the UV
XperianPro
Members
- 26 Oct 2013
- 648
- 82
XperianPro
Members
- 26 Oct 2013
- 648
- 82
Yes,I flashed you latest CM.
Also im not sure what features you mean but there is no CPU,GPU overclock no fiops and etc.
Attachments
It is because you are running cm 12 original kernel that comes with the ROM.
You have to flash the kernel afterwards like someone said. I don't include the kernel to use any kernel solution.
I explained more on the xda thread what it does.
BTW I am building 5.0.2!
Sent from my nexus 10
Just kinda sucky we don't have sound. Tried to check few other tree devices with the same soc to see if I could figure out something to fix the problems but nothing so far.... I still have or'two things to try ... But I fear we need specific adjustment... Well micha surely will fix that soonish.
Sent from my nexus 10
