Bricked Redmi 2 2014813

[Adrian53]

I already tried that, no luck as well. Don't waste your time

Thanks for the advice, I will try to follow the following tutorial, maybe manage to flash something on it. What adb commands you tried?
link: http://en.miui.com/thread-52488-1-1.html

 

[Adrian53]

Although Redmi 2 is an old phone and I thought that it has the bootloader unlocked...guess what:
command: fastboot oem device-info

 

[Alexiaomi]

TWRP from this MIUI.EU site for Redmi 2 (wt86047 / 2014813) is wt86047-TWRP3.0.0-1_LP.zip. What is the right windows command to install this TWRP with fastboot method? fastboot flash recovery.............???? Cannot find twrp.img in this zip.

 

[Adrian53]

TWRP from this MIUI.EU site for Redmi 2 (wt86047 / 2014813) is wt86047-TWRP3.0.0-1_LP.zip. What is the right windows command to install this TWRP with fastboot method? fastboot flash recovery.............???? Cannot find twrp.img in this zip.

That's because the twrp.img is in the adb file. just run the "Flash-TWRP.bat" if you don't understand the commands.
PS: fastboot flash recovery twrp.img is to flash it forever; but you can also flash ti to use it one time, and keep the original one with: "fastboot boot twrp.img"

 

[Alexiaomi]

That's because the twrp.img is in the adb file. just run the "Flash-TWRP.bat" if you don't understand the commands.
PS: fastboot flash recovery twrp.img is to flash it forever; but you can also flash ti to use it one time, and keep the original one with: "fastboot boot twrp.img"

But what must I do to run "flash-TWRP.bat"?

 

[Adrian53]

But what must I do to run "flash-TWRP.bat"?

Okey, i didn't realize you are new to these things.
Short answer: right click on the "flash-TWRP.bat", click on Run as administrator. (before all this, make sure you have your phone connected to the PC)

Long answer, see the guide here: http://en.miui.com/thread-249552-1-1.html

 

[Alexiaomi]

Okey, i didn't realize you are new to these things.
Short answer: right click on the "flash-TWRP.bat", click on Run as administrator. (before all this, make sure you have your phone connected to the PC)

Long answer, see the guide here: http://en.miui.com/thread-249552-1-1.html

Thank you. I will keep on trying and will let you know. For now I take a break.

 

[Adrian53]

Thank you. I will keep on trying and will let you know. For now I take a break.

Always a good idea, Rustig aan! and Good luck!

 

[Alexiaomi]

Always a good idea, Rustig aan! and Good luck!

Yep, rustig aan haha

 

[Eskha]

any solution same problem !

 

[nings]

Yes you can solve the problem => replace eMMC or whole mainboard if you haven't an IRDA station at home for unsolder eMMC

The problem is simple, Xiaomi put crap eMMC who last about 1 year on Redmi 2 - 2014813. It's why Xiaomi replace mainboard in China for free. All other customers are just ignored. The only way for use the phone without change mainboard/eMMC is boot to SDCard but you should have a computer for boot because no BIOS or way to boot directly on SDCard.
It's why you should buy a Librem 5 a phone who give you the full control of your phone !

For explanation about this problem, you can transfer/write files because go to RAM but the eMMC is in "safe mode" read only why you can't write anything on your phone or change any partition.